666Fabrication skidplate

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Goya20
    replied
    mmmm hmmmm yea i scrape alot on my e30 already broke one oil pan i will be contacting u

    Leave a comment:


  • ejnight
    replied
    Originally posted by E30QC
    How hard of a shock will it take? being aluminum and all? I need to remove my front tires, and straight up drive around to make sure its' all good!?! I live in Quebec, and when you see 5inch lips on the street, following a 5 dip, making 120kph very sketchy..
    I'm on my third pan now, and i don't want to go back to stock ride height... help me pls.
    I don't think they make them any longer, but I do. In steel, and very strong.

    Leave a comment:


  • E30QC
    replied
    How hard of a shock will it take? being aluminum and all? I need to remove my front tires, and straight up drive around to make sure its' all good!?! I live in Quebec, and when you see 5inch lips on the street, following a 5 dip, making 120kph very sketchy..
    I'm on my third pan now, and i don't want to go back to stock ride height... help me pls.

    Leave a comment:


  • atomic
    replied
    Also you guys forget he needs a fist full of ones for the strip bars too !!!! On top of all the other things that is a must to operate a business.

    Leave a comment:


  • Mastrcruse
    replied
    I can't remember where I read it but isn't there a problem with the skidplate and the converitibles setup? I might purchase one if I can get this other convertible

    Leave a comment:


  • pwforprez
    replied
    i saw one on yesturday and as soon as the money comes in im getting one because i think its kinda stupid if you dont want to protect that oil pan.. ive smaked mine twice in one week

    Leave a comment:


  • whiltebeitel
    replied
    Originally posted by backtrail69
    It attaches to the bottom of your core support and the mounts for your steering rack on the front subframe.
    Ok, because that beats the everloving crap out of only attaching to the front valence like it kinda looked like. That should be one sturdy mofo. I may get one this summer... esp. if it can be painted black...

    Leave a comment:


  • DanielHStout
    replied
    Originally posted by O 16581 72452 5
    I'm assuming it's plate steel rather than aluminum though, aluminum doesn't hold up well to impact (ask people why they buy these and you'll find out what aluminum does when impacted). ;)
    Its made from 1/8" aluminum.

    Leave a comment:


  • backtrail69
    replied
    It attaches to the bottom of your core support and the mounts for your steering rack on the front subframe.

    Leave a comment:


  • whiltebeitel
    replied
    Just a quick question, it only seems to attach to the front lip, or am I missing something?

    Oh, and from what i'm told, welding aluminium is a b*tch and a half.

    Leave a comment:


  • dinanm3atl
    replied
    Originally posted by O 16581 72452 5
    I'm normally a cheap ass like people could see in my Mark D chip thread i got flamed for, but i completely agree with his price, that's a good deal!

    I'm assuming it's plate steel rather than aluminum though, aluminum doesn't hold up well to impact (ask people why they buy these and you'll find out what aluminum does when impacted). ;)

    The steel alone is worth around $40, factor in his labor, most work like this costs around $40-$50 an hour. His tig welding wire (plus the initial cost of his tig welder...that extension is tig welded on...right?), the bits for his hole saw (again, plus the cost of the actual hole saw), the metal bender, plus probably $30 for shipping, the price and labor of boxing.

    I find his price very reasonable.
    Plus overhead, plus business taxes, plus employee payroll and insruance. Shop insurance. Day to day operations, heat in winter, A/C in summer.

    It is sad when people complain of price and don't pay any of these bills.

    Leave a comment:


  • Lof8
    replied
    +1 for 24v skidplate

    Leave a comment:


  • japspecvr6
    replied
    Originally posted by Mot
    ya us 24v guys could really use one.. I know my pan sits low.
    Ohh Yaaa :nice:

    Leave a comment:


  • O 16581 72452 5
    replied
    Originally posted by bastianshaw
    wow is anybody else sick of getting gouged on parts?
    cool peice but $185?
    its just aluminum.
    I'm normally a cheap ass like people could see in my Mark D chip thread i got flamed for, but i completely agree with his price, that's a good deal!

    I'm assuming it's plate steel rather than aluminum though, aluminum doesn't hold up well to impact (ask people why they buy these and you'll find out what aluminum does when impacted). ;)

    The steel alone is worth around $40, factor in his labor, most work like this costs around $40-$50 an hour. His tig welding wire (plus the initial cost of his tig welder...that extension is tig welded on...right?), the bits for his hole saw (again, plus the cost of the actual hole saw), the metal bender, plus probably $30 for shipping, the price and labor of boxing.

    I find his price very reasonable.
    Last edited by O 16581 72452 5; 01-19-2007, 10:09 PM.

    Leave a comment:


  • Mot
    replied
    ya us 24v guys could really use one.. I know my pan sits low.

    Leave a comment:

Working...