Feeler GB - 280x10mm rear kit

[Massive Lee]

The number is 34211160402

[Massive Lee]

I also put another request to Walloth & Netsch for the later discs.

[Brian D]

OK, thanks.

[morvaman]

Is it possible to get these rotors manufactured?

[Massive Lee]

Is it possible to get these rotors manufactured?

Yes. Racingbrakes can manufacture them for me if I order 100 units. And pay them upfront. That's 50 kits.

[morvaman]

what is the offical price?

[Massive Lee]

There's no official price as the rear kit is far from being in production. The second generation Z1 rear rotors (280x10) are getting dificult to get. So, I am still looking for a rear 280mm disc, 10 or 22mm thick, with a 160mm x 25mm drum.

[e30love]

anything more on this lee?

[Massive Lee]

anything more on this lee?

The first generation Z1 discs are the same as regular e30s. The second generation Z1 have larger units, which are what we want. But as they are not easily available, well, they can't be used. The alternative is in post #5 (http://www.r3vlimited.com/board/show...1&postcount=35) but I doubt I can have 50 buyers for the rear kit, so it won't happen. Sure, I can use a two piece rotor, but the price will be the same as the 300mm rear kit, plus handbrake, and it is against the original idea of an affordable brake kit.

[morvaman]

what if i purchase the two piece rotor can you fab the mounts?

[z31maniac]

what if i purchase the two piece rotor can you fab the mounts?

He already sells a kit with a 300 x 32 two piece rotor for the rear.

[Massive Lee]

what if i purchase the two piece rotor can you fab the mounts?

Yeah sure. If you order a minimum of 10 sets.
Don't forget that the rear rotors must be at least 280mm to fit a Dynapro clamper.

He already sells a kit with a 300 x 32 two piece rotor for the rear.

Indeed. Available with lug mounted Superlites or Dynapros, or the more expensive radially mounted SL4R. Many options are already available.

SL4R rear e30 kit. It can even be optioned up to $1750usd with optional floating rotors and drive pins.

[morvaman]

Lee,which one of your rear kit would u recomend to go with your street kit?

[Massive Lee]

Lee,which one of your rear kit would u recomend to go with your street kit?

If you purchased a Street kit, most likely all you need is a good set of rear pads. If you had purchased, say, the front Race kit, then my advise would have ben to go with the rear 300 x 32mm kit.

Lee

[bwh13]

I can check my brake specs catalog and see if there is another rotor that can be used in place of the Z1 rotor...