S50/S52 guys! RMS Superchargers

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • onaquest
    replied
    Any updates on seeing some charts for the Stg 1 s52 kits?

    Leave a comment:


  • JGood
    replied
    What kind of power output could we expect on an m50b25tu?

    Leave a comment:


  • sonnyqm3
    replied
    Anyone in the market for s50b32 engine kits.. Email me at wizard.werks@yahoo.com. I have low mileage engine kits available..

    Leave a comment:


  • k5gsxr1000
    replied
    I had to move the abs back a little and bend new lines. That's if you want to keep the abs. Also had to move the coolant bottle to make room. These are pics once it was installed. Cleaned the engine bay up and nothing is twisting now. Here in TX I pass the smog test without breaking a sweat

    Last edited by k5gsxr1000; 10-07-2009, 09:23 PM.

    Leave a comment:


  • Dominic49
    replied
    yes let me know what it will take. i'll be down for a stage 2 kit in the coming months

    Leave a comment:


  • vlad
    replied
    Originally posted by k5gsxr1000
    not really a drop in kit but a little modifying and you will be good to go.
    define 'little modifying'
    thanks

    Leave a comment:


  • k5gsxr1000
    replied
    not really a drop in kit but a little modifying and you will be good to go.

    Leave a comment:


  • Dominic49
    replied
    so these are BOLT IN for a e30 s50 setup?

    Leave a comment:


  • tonytony
    replied
    damnit should have just waited for a vanos m50, eh oh well

    Leave a comment:


  • nmlss2006
    replied
    Hm, I took a look at the Euro M3 kit.. all well and good, but peak power @ 6100 RPM doesn't make much sense on that engine: could you elaborate? Thanks!

    Leave a comment:


  • Spaz
    replied
    Can you post up any charts?

    I'd prefer to see one done on pump gas.

    -Cam

    Leave a comment:


  • rneedham1979
    replied
    Okay

    Leave a comment:


  • e30polak
    replied
    Originally posted by rneedham1979
    I do not see any BMW cam that is to aggressive for a supercharger. What are the specs? As long as it doesn't have a bunch of overlap it will be fine. He will need a custom tune of course.
    280/278, too much overlap. Going with a different grind anyway.

    Leave a comment:


  • rneedham1979
    replied
    I do not see any BMW cam that is to aggressive for a supercharger. What are the specs? As long as it doesn't have a bunch of overlap it will be fine. He will need a custom tune of course.

    Leave a comment:


  • e30polak
    replied
    Originally posted by rneedham1979
    Why wont he keep his cams?
    He has a grind very similar to Sunbelt's sport cams, which is too aggressive for a S/C. ;)

    Leave a comment:

Working...