Can you make one for the ix you did it for the skid plates
Announcement
Collapse
No announcement yet.
Cross Brace for your E30
Collapse
X
-
Originally posted by robrez View PostThere wouldn't be any issues if you have an e30 M3 style, strut mounted swaybar set up, correct?Custom Made Skid Plates For Sale.
http://www.r3vlimited.com/board/showthread.php?t=111469
http://raceskids.com/
Comment
-
Originally posted by ejnight View PostI run the 25mm IE sway bars and it clears by a long way. You can space it down if needed there are spacers in the kit for this.
If it is only made to fit up to 21mm sways that would be good to know ahead of time dont ya think..before my new equipment scrapes itself.
I mean i ordered mine from bavauto before i was a member of this forum and the hardware i got was installed with the cross brace. Dont get me wrong i love the handling & how it compliments a stiffer sway.
Just wish there werent fitment issues. And since theyre touching how harmful is that to my car?
...and let me be clear. i am not trying to bash on the product..it is worth the money. You will notice your car stay on line soo much easier/faster and it pulls out of apexes much better. I guess ill just be going to lowes. And personally after spending that kinda money i feel i shouldnt have to go to lowes..or at least i should know before buying and commiting to spend for a product ill have to changem20 is plenty. im simply a drifter.
build thread -- http://www.r3vlimited.com/board/showthread.php?t=206510
Comment
-
Originally posted by CorvallisBMW View PostI had the same issue and the only solution I found was to go with an oem convertible 21mm bar. All the aftermarket bars had almost 0 clearance between them and the brace
i love my sways and xbrace. dont wanna change sway sizes since i already paid so much for the ST kit and like the way it handles..plus its all marked up now.even if i wanna sell it and get a little smaller its damaged goods.lol no one will wanna buy itm20 is plenty. im simply a drifter.
build thread -- http://www.r3vlimited.com/board/showthread.php?t=206510
Comment
-
Originally posted by ROLLingKING View PostSo with a 25mm front sway..how many spacers are u running?
If it is only made to fit up to 21mm sways that would be good to know ahead of time dont ya think..before my new equipment scrapes itself.
I mean i ordered mine from bavauto before i was a member of this forum and the hardware i got was installed with the cross brace. Dont get me wrong i love the handling & how it compliments a stiffer sway.
Just wish there werent fitment issues. And since theyre touching how harmful is that to my car?
...and let me be clear. i am not trying to bash on the product..it is worth the money. You will notice your car stay on line soo much easier/faster and it pulls out of apexes much better. I guess ill just be going to lowes. And personally after spending that kinda money i feel i shouldnt have to go to lowes..or at least i should know before buying and commiting to spend for a product ill have to changeCustom Made Skid Plates For Sale.
http://www.r3vlimited.com/board/showthread.php?t=111469
http://raceskids.com/
Comment
-
How do i stop rubbing!?!?!?
soo im back! haha
and still having rubbing issues. this time I have pics tho. I tried putting washers in the bolts where it goes through the steering rack. Lowered the car and it immediately rubbed. I also dont like it this way cause the bolts just barely reach the nut..im not sure if theres enough bolt going through the nut up top so im going to try washers at the lolipops, where the cross brace connects there.
Is this pic below not how it should be installed at the steering rack???
And this pic below is with the 3 washers. But the bolt only goes about HALF way through the nut up top..that bad?
I have a suspension techniques 22mm front sway and only HR sport springs. its not like im 2 low. I just dont want things rubbing making noise. Some ppl say it wont do anything and i should just not worry but i dont think the sway is seated where it should be since it rubs so hard first. and now rust!m20 is plenty. im simply a drifter.
build thread -- http://www.r3vlimited.com/board/showthread.php?t=206510
Comment
-
Originally posted by Wishno87 View PostUmm shouldn't the washers be on the other side of the cross brace if you want to lower it?
YesCustom Made Skid Plates For Sale.
http://www.r3vlimited.com/board/showthread.php?t=111469
http://raceskids.com/
Comment
-
work with m30 swap?I can run Auto Checks on VINs for tips/donations:
PM me VIN(s) and I'll get you ALL the public recorded info that I have available.
paypal as gift to Mike@benzinkrieg.com
Information/Request sticky thread for Vehicle History Reports
http://www.r3vlimited.com/board/showthread.php?t=216119
Comment
-
Originally posted by Mercury[BKM] View Postwork with m30 swap?Custom Made Skid Plates For Sale.
http://www.r3vlimited.com/board/showthread.php?t=111469
http://raceskids.com/
Comment
-
m20 is plenty. im simply a drifter.
build thread -- http://www.r3vlimited.com/board/showthread.php?t=206510
Comment
-
Its hard to tell but from looking at my cars with stock bars and 25mm aftermarket your bar looks to be forward of where mine are.Custom Made Skid Plates For Sale.
http://www.r3vlimited.com/board/showthread.php?t=111469
http://raceskids.com/
Comment
-
Originally posted by ejnight View PostIts hard to tell but from looking at my cars with stock bars and 25mm aftermarket your bar looks to be forward of where mine are.
While my car was jacked in the air my sway bar was horizontal...someone told me it should sit horizontal while the car is on the ground. So i lowered the car with my jack and my sway bar points UP for some reason.
I believe its the design of the sway bar so ill have to get a different front sway to keep the cross-brace, which i def wanna keep. like i said, i like it a lot.
Heres pics of the bar set up and tell me if it looks normal and if you reach the same conclusion of it being the bar design.
Thanks a lot for the help.. and ill stop hijacking your for sale thread.lolm20 is plenty. im simply a drifter.
build thread -- http://www.r3vlimited.com/board/showthread.php?t=206510
Comment
Comment