Stromung 325is Cat Back Group Buy

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • peerless
    replied
    Just got a 10th buyer today, you should start recieving calls from Scotty at Stromung. Its on, production has started and should be shipping soon.

    Nice job guys!

    Leave a comment:


  • IDM
    replied
    Nice videos Vacman but were you naked on the last one?

    Love the Racing Dynamics tach? Any other RD stuff on the car?

    Leave a comment:


  • Jesse30
    replied
    omg, i want your tach.

    Leave a comment:


  • dannyg
    replied
    ^ Nice tach! Sounds awesome, can't wait...

    Leave a comment:


  • VacMan
    replied
    Made a few videos today when I took the cabrio to get smogged. They still really don't do the exhaust justice...the tone is so deep in the lower revs that the camera just can't pick it up. This is with a stock cat, btw.

    Had some Focus guys talking to me about the car while it was on the dyno so didn't get any video of that. The wife drove it home so get a little video of that with her (good) camera. The other two were with my Storm2.

    BTW in the final video I was so intent on stabilizing my blackberry that I hit the revlimiter in second and then didn't notice the cop coming towards me until I was halfway through 3rd. Oops. :) Good thing that wasn't in my wagon or it would have been ugly. 140kmh = 86mph.

    Hope these help.





    Last edited by VacMan; 02-13-2010, 09:13 PM.

    Leave a comment:


  • 5ickride
    replied
    I've been looking for pictures of ANY aftermarket muffler installed on diving board e30s but have come up short. Does anyone have any pics available for DB versions only? A Stromung muffler would obviously be best...

    thanks

    Nevermind, i found a few pics...looks good!
    Last edited by 5ickride; 02-13-2010, 09:32 AM.

    Leave a comment:


  • 5ickride
    replied
    Originally posted by dannyg
    http://www.realoem.com/bmw/showparts...71&hg=18&fg=20

    This is what you need:

    05 Clamp 1 09/1987 18211707923 $15.70
    06 Clamp 1 09/1987 18211178126 $15.70
    08 Collar nut M8 4 07119927022 $0.20

    Those are the upper brackets that get bolted to the exhaust. Now I would also order new bolts and nuts to connect it to the cat.

    http://www.realoem.com/bmw/showparts...70&hg=18&fg=05

    25 Hex bolt M8X55 4 07119912524 $0.54
    26 Hex nut M8 4 11621711954 $0.60

    On that first link you can see if you need to replace any of your other parts, but everything else should be good, unless your rubber hangers are torn etc.
    Very helpful! Thank you.

    Leave a comment:


  • dannyg
    replied
    Originally posted by Imagine_M
    Now I am interested!

    But, my question is that my automatic 86 325es has a great low millage oem cat on it so I would not want to touch it.

    I am sure I will need an adapter to go from the single to this catback duel setup... but is this even worth doing or possible?

    Also will I loose back pressure, well ha ha ha i have holes in the one now so i know I will gain back pressure but will it effect anything because I have an automatic?

    Can they weld up an adapter for me?

    I have a kid that rides in the car will it be too loud for like a sleeping baby?

    And finally because I have a DB car will the exhause exit in the correct spot? (are all e30 exhaust locations identical?)

    Thanks for your answers!
    I'm sure any exhaust shop could make you an adapter to get it to work.

    Leave a comment:


  • Imagine_M
    replied
    Now I am interested!

    But, my question is that my automatic 86 325es has a great low millage oem cat on it so I would not want to touch it.

    I am sure I will need an adapter to go from the single to this catback duel setup... but is this even worth doing or possible?

    Since their is no resonator and it is duel will I loose back pressure, well ha ha ha i have holes in the one now so i know I will gain back pressure but will it effect anything because I have an automatic?

    Can they weld up an adapter for me?

    I have a kid that rides in the car will it be too loud for like a sleeping baby?

    And finally because I have a DB car will the exhause exit in the correct spot? (are all e30 exhaust locations identical?)

    Thanks for your answers!
    Last edited by Imagine_M; 02-11-2010, 08:04 PM.

    Leave a comment:


  • dannyg
    replied
    Originally posted by 5ickride
    Thanks, can you provide a list of parts needed, if say, i didnt have any to begin with? Im sure mine's going to need something since i'm replacing what is already a pretty rusted muffler.
    http://www.realoem.com/bmw/showparts...71&hg=18&fg=20

    This is what you need:

    05 Clamp 1 09/1987 18211707923 $15.70
    06 Clamp 1 09/1987 18211178126 $15.70
    08 Collar nut M8 4 07119927022 $0.20

    Those are the upper brackets that get bolted to the exhaust. Now I would also order new bolts and nuts to connect it to the cat.

    http://www.realoem.com/bmw/showparts...70&hg=18&fg=05

    25 Hex bolt M8X55 4 07119912524 $0.54
    26 Hex nut M8 4 11621711954 $0.60

    On that first link you can see if you need to replace any of your other parts, but everything else should be good, unless your rubber hangers are torn etc.

    Leave a comment:


  • KeeperJones
    replied
    Love Mine

    I have had my Stromung for a couple years now and I love it. At idle it is pretty quiet, but it can put out the dbs. I love the sound though. There are a couple of tunnels in Seattle and I love shifting down and opening it up, sounds great. And it still looks great too.

    One thing to keep in mind, this will last 2-3 times as long as a standard exhaust, so the price is not terrible.

    Leave a comment:


  • 5ickride
    replied
    Originally posted by peerless
    Thank You Danny for fielding that last question. In regards to installation, you will simply remove the existing cat back and both lower hangers. The muffler will have provisions on it to simply bolt straight to the upper factory brackets.

    The Cat back itself does not include any addition mounting hardware. If you need any new rubber hangers, mounting straps, or doughnut gaskets I would recommend calling your preferred parts house and ordering what you need ahead of time so that you have everything you need before installation.

    In other news I have passed on the information on the 9 buyers we have already.

    You should start receiving a call from Scott at Stromung for payment information.

    All the materials have all ready been ordered for all 12 systems and we still have 4 open slots.

    Production should be starting next week.

    Take Care, and Thanks
    Thanks, can you provide a list of parts needed, if say, i didnt have any to begin with? Im sure mine's going to need something since i'm replacing what is already a pretty rusted muffler.

    Leave a comment:


  • NC325iC
    replied
    nice...

    this is gonna make my e sound badass... and then my 3.0 sound triple badass

    Leave a comment:


  • peerless
    replied
    Thank You Danny for fielding that last question. In regards to installation, you will simply remove the existing cat back and both lower hangers. The muffler will have provisions on it to simply bolt straight to the upper factory brackets.

    The Cat back itself does not include any addition mounting hardware. If you need any new rubber hangers, mounting straps, or doughnut gaskets I would recommend calling your preferred parts house and ordering what you need ahead of time so that you have everything you need before installation.

    In other news I have passed on the information on the 9 buyers we have already.

    You should start receiving a call from Scott at Stromung for payment information.

    All the materials have all ready been ordered for all 12 systems and we still have 4 open slots.

    Production should be starting next week.

    Take Care, and Thanks

    Leave a comment:


  • dannyg
    replied
    Originally posted by 5ickride
    will all the mounting hardware be included?
    You can reuse the stuff you already have. Unless its too badly rusted.

    Leave a comment:

Working...