check for said amount is in the mail, Lee.
Mariano
New Massive brake kits for e30s
Collapse
X
-
Lee a few questions since at my current location i cannot access your website.
1. the front race kit fits under 16x8 rota slips that were a group buy on here correct? I think i saw a picture of a member, but again photobucket is blocked so pretty much 1 out of 10 pictures load for me currently.
2. any option to run the SL6R caliper on a regular E30?
3. would it be possible to down the road, upgrade to SL6R's in the front and superlights in the rear?Leave a comment:
-
Ill send payment shortly. Ill take the black calipers, please.
MarianoLeave a comment:
-
I downloaded the PDF's today and it looks like the Sport Dynalite caliper will fit an LS without mods (maybe a 1mm spacer to be ultra safe) and the Sport Superlights with a 10mm spacer. 57mm studs and a 10mm spacer should do the trick for Sport/Superlights 11.75x.81 on an LS Ronal.
Did not measure my LS's for the race kit. For what it's worth my LS's are 15x7.5 25mm offset.
My results may vary, measure for yourself before you buy!
EdLeave a comment:
-
Hi Mariano.
Yes, the kit includes every nut and bolt (and brakelines) to install it. No extra part required. The only mod that I recommend is to slightly grind off the excess metal casting/flashing of the control arms toward the rotor. 20 years of driving has stressed the spindles and they sometimes are out of specs. On my own car, one spindle was a bit more canted than the other. Removing the flashings will take about 5 minutes and will not interfere with the control arms' integrity. It will allow the spindles to bend in very high G corners without letting the control arms contact the rotors.
Paypal (+4%) is massivebrakes@gmail.com (my email address).
Or for checks. Make it payable to:
Massive
4850 Henri-Julien Avenue
Montreal, QC H2T2E1
Canada
LeeLeave a comment:
-
WHere do I send to in case I send a check?? PM me. This comes with everything needed to install and all that correct? JUst checking. Is yur paypal the gmail account?
MarianoLeave a comment:
-
Hi Mariano.
While paying my bills with Wilwood yesterday, I learned there was a slight price hike (minor), but also that I must charge California taxes on Wilwood parts, not on installation kits. Are you in California? So here is how it goes with the revised price.
Installation kit: $650usd (no change - no tax) + $35usd shipping = $685usd
HD rotors - $75usd each (was $70usd) x 2
SL6R - $310usd each x 2
Optional Q Compound brakepads - $75usd (was $70usd)
Sub-total Wilwood: $845usd + 6.25% tax= $898usd + $25usd shipping = $923usd
Total with shipping and taxes: $1608usd
If you have your own source for Wilwood parts, you can order the instaallation kit only.
I accept Paypal (+4%) or checks if sent Express.
LeeLeave a comment:
-
Ill take the smaller kit in that case. Where do I send the money?
MarianoLeave a comment:
-
I suggest that you get to the website and download the profiulees in .pdf format. Print them, cut them out and test against your wheels. Most likely, the Race kit won't fit but the Sport kit will. Two calipers are available: Forged Superlite and BNDL (smaller, offering more clearance)Leave a comment:
-
Hi Mariano. At 1,5mm or 3mm (1/16th or 1/18th) it is only to do so fine tuning if the wheels need a little extra room. I understand the appeal that many people have with the bigger 13" kit, but only hardcore racers will need it. The 11.75" x 1.25" Rally kit is more than enough for HPDEs and doesn't necessitate a rear kit. It is a much better system than stock, and the difference can easily be felt. Let me know what kind of wheels you intend to use.Leave a comment:
-
hmmm. If I get the spacers\, would I be able to get the larger ones? Work out a total and let me know.
MarianoLeave a comment:
-
Hi Mariano.
The Rally kit is available now and in stock (7 sets available). As far as I know, it is the only one in the world to fit 15" wheels such as Kosei K1s. The fit and rotor/caliper alignement is perfect. The only tolerance would come from the age of your strut. From a strut to another, there is a huge discrepency with the distance from the rotor to the control arm casting (steel flashes). Which can be exacerbed when tracking the car with sticky R Compounds. Knuckles are soft and can bend. Which is why I highly recommend to slightly grind off 1 or 2 mm from the control arm (around the ball joint - facing the rotor) to remove any extra flashing. It is more a polish job (than a grinding job) and takes 1 minute per side. Racers will most likely have the knuckles already reinforced anyway.
$650usd for installation kit only (hats, plated steel mounts, all graded fasteners, custom DOT braided lines, 90º fittings).
Or $1410usd with calipers (SL6R) and rotors (HD 11.75" x 1.25")
Pads are extra ($70) for Wilwood's Q Compound - Dustfree, squealfree, gentle on rotors, wide range of temp. Perfect crossover for street and track. Or buy your own choice (HT-10 / PF97-01 for track) from your local supplier.
Shipping of installation kit is 4 days/$35usd
Shipping of Wilwood parts is 4 days/$35usd to Cali
These days, I include free 1,5mm or 3mm spacers (your choice) to help clear wheels.Last edited by Massive Lee; 05-18-2007, 04:42 AM.Leave a comment:
-
Do you have them in stock yet? Thanks. Let me know how you want payment cuz on the site they are unavailable.
MarianoLast edited by CleanAzzE30z; 05-17-2007, 01:25 PM.Leave a comment:

Leave a comment: