Special Pricing on ALL Work Wheels

[DPI]

I'll do special pricing on all Work wheels. They will be pretty good discounts off of MSRP.

Contact me for a quote on what you would like, I'll need what model you are interested in, diameter, width, bolt pattern, offset. I'll help you pick offsets and width if you need assistance.

AIM: DPIstore
Email: Joe@DPIstore.net
or you can PM me

[KO-SALES-TEAM]

I own a set of Euroline DH and CR-Kais. Both excellent quality and worth every penny! If I didnt have enough, I'd quote a set of Work Equip 03s. ;)

- Erick

[sirsteezo]

pm sent.

[JoeyJoeJ0]

Work Equip 03's in 15x8.5 +10?

[golde30]

euroline DH + S1 2pc 17x9 et10 4x100?

[Ray Smoodiver]

W-ITS Brombacher 17x8 et17 / 17x9 et12, 5x120?

[DPI]

PM sent to everyone who put in a request.

[Erick]

Work Equip 03's in 15x8.5 +10?

You should run that in the front only ;)

[stormspike]

any pics of wheels on E30? Which ones look good on the car in 16 or 17"? I have 2 door 89 325i and am looking for wheel replacement from stock. Thanks!

[ZiMMie]

soo all these wheels comes in ANY bolt pattern?

[BlackE30]

Vs xx 4x100 17x8 or 16x8/16x9s

Jeff

[JoeyJoeJ0]

You should run that in the front only ;)

ill have to think about it ;) maybe +0 or -2 in the rear :-D

[Erick]

soo all these wheels comes in ANY bolt pattern?

You need a Work wheel catalog to find out exactly what's available. There's a lot of options (width/offset) to choose from, but you cannot pick your exact offset.

It varies wheel per wheel. For example: 17" Work Emotion CR-Kais only come in 4x100 only come in 7 or 8" wide, and the only available offsets are +42, +37 or +25. You cannot go any lower than that on a Work CR-Kai. It is also my understanding (and maybe Joe can confirm this for me) that certain rare size/offset wheels require special orders. For a 4x100 17x8 +25 CR-Kai, you need an order of 20 sets in order for them to make it. And then the 6-8 week lead time.

[Speedjunkiejp]

equip 03's 15x8 +4 front 15x8 +0 back please.. in black.

btw work wheels rock.. had a set of the FS's on my xB and they were great.. if you ding the lip then you can just sand them down (friend curbed his DH's and we wet sanded them down to new)

[DPI]

You need a Work wheel catalog to find out exactly what's available. There's a lot of options (width/offset) to choose from, but you cannot pick your exact offset.

It varies wheel per wheel. For example: 17" Work Emotion CR-Kais only come in 4x100 only come in 7 or 8" wide, and the only available offsets are +42, +37 or +25. You cannot go any lower than that on a Work CR-Kai. It is also my understanding (and maybe Joe can confirm this for me) that certain rare size/offset wheels require special orders. For a 4x100 17x8 +25 CR-Kai, you need an order of 20 sets in order for them to make it. And then the 6-8 week lead time.

Yep, that is correct. All the oddball one piece wheels have a minimum order of 20 wheels. I'd like to stay away from those if possible. But still let me know if you are interested.

All the multi piece wheels are custom built to order so they are fine to order, and they have a real good selection of offsets.