might get some spacers made up....

[1991 e30 bmw 318is]

Tire Rack has what you need (3mm, 57.1 center bore, aluminum, etc.), and they're cheap ($12/each). Part number is TR364.

i cant find them on there site....

[fretburnr]

I've heard of FK spacers falling apart over time. Personally, I cannot see how this would happen unless the hub face was *really* nasty prior to installation....

I can't see it either - just like the h&rs, they're pieces of machined aluminum, not subject to rust like steel would be.

[ldsbeaker]

I guess instead of 10, I'm going to have to get 13. Freakin' poke.

[E30 Racer]

Here's a list of FK spacers all with 57.1 hub openings (anything bigger than 12mm has hubcentric extension, below that there's not enough material to make it happen). I have the 20mm type A ones, and they're just as quality as H&R.

3,5,8,10,13,15,20 mm in type A (normal spacers)

also Type B bolt-on spacers in 15,20,25,30,35 mm

http://www.ngpracing.com/Merchant2/m...de=spacer4x100

I've heard of FK spacers falling apart over time. Personally, I cannot see how this would happen unless the hub face was *really* nasty prior to installation....

[E30 Racer]

might get 3mm spacers made up for the e30 hub 57.1mm with only 4 holes in it for the bolts. They will be aluminum. i needed 3mm spacers for the front of my car, and the universal spacers are junk so i thought i would get some laser cut. and then there nice and perfect. so i would get a bunch made up if there is interest in them, also might get like 5mm ones made up. with the 3mm spacers your hub will still stick out i think so there is no need for hub centric rings on them. will just be a flat plate. not sure exactly what they will cost let me know if your interested at all, and any other suggestions to this would be great.

Tire Rack has what you need (3mm, 57.1 center bore, aluminum, etc.), and they're cheap ($12/each). Part number is TR364.

[fretburnr]

Here's a list of FK spacers all with 57.1 hub openings (anything bigger than 12mm has hubcentric extension, below that there's not enough material to make it happen). I have the 20mm type A ones, and they're just as quality as H&R.

3,5,8,10,13,15,20 mm in type A (normal spacers)

also Type B bolt-on spacers in 15,20,25,30,35 mm

http://www.ngpracing.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=spacer4x100

[netcsk]

2mm is tiny. If 10mm works, 8mm should work just as well.

[ldsbeaker]

They totally don't have a lip on the inside to "carry" the wheel.
I want a spacer like they have in 15mm, just 10.

[AlarmedBread]

try here, they have some of what you guys want

http://www.amimotorsports.com/store/cart.php?m=product_list&c=180

[JGood]

No, they sell 3, 5, 8, 15, and 20 mm. Sucks. I want 10 dammit!
I have some 10mm ones that came with my MM II's. They are pretty damn sweet.

Weird, I got some 10mm hubcentrics spacers that came with my MM11-2's as well...

[ldsbeaker]

No, they sell 3, 5, 8, 15, and 20 mm. Sucks. I want 10 dammit!
I have some 10mm ones that came with my MM II's. They are pretty damn sweet.

[europeanplates]

Does H&R not already make these??

Tyler

[z31maniac]

See what a 10mm cost, that seems to be a common need that no manufacturers make.

A 10mm hubcentric spacer would open up alot of wheel choices.

[1991 e30 bmw 318is]

not getting them made, due too no interest.

[1991 e30 bmw 318is]

http://www.r3vlimited.com/board/showthread.php?t=94284

he is no longer selling them. but they will be like the same idea. prob about the same cost also. only doing 4x100