might get some spacers made up....

[1991 e30 bmw 318is]

there not getting made.

Interested in 5 for the fronts and 8 for the backs

[ldsbeaker]

The post was too big. So I'm going to whore my own thread.

http://www.r3vlimited.com/board/showthread.php?p=1027069#post1027069

[AlarmedBread]

Not a good idea. You really want to maintain a hubcentric relationship, even with studs. Studs just make mounting/dismounting wheels a bit easier.

Sorry I should have been more specific. I meant non-hubcentric spacers are OK, I've had 0 issues with the cheapo universal ones you can get for $5 each at any tire shop Should be ok for anything 10mm or less. YMMV however.

[surebimmer]

Just found this for you 4x100 guys as well:

http://www.ichibausa.com/4x100.html

[ethirdy]

Here's a list of FK spacers all with 57.1 hub openings (anything bigger than 12mm has hubcentric extension, below that there's not enough material to make it happen). I have the 20mm type A ones, and they're just as quality as H&R.

3,5,8,10,13,15,20 mm in type A (normal spacers)

also Type B bolt-on spacers in 15,20,25,30,35 mm

http://www.ngpracing.com/Merchant2/m...de=spacer4x100

Thinking of either the 15mm or the 20mm - wheels are 16x7.5 ET 40, 88 cabrio (low arches), IE 3 springs, not sure on tire size yet - thoughts?

[surebimmer]

Vorshlag makes 5mm for you 4x100 guys

http://www.vorshlag.com/product_info.php?cPath=1_17_32&products_id=145

[ldsbeaker]

Well I'm going to give it a go with this guy. I'll report back.

[E30 Racer]

well. I looked for BBS spacers. Couldn't really find anything.
HOWEVER I did fill out a custom quote on wheeladapter.com, ...

The reason 10mm hubcentric spacers are virtually nonexistent for our cars is that there simply isn't much material between the back side of the spacer (where it engages the protrusion of the hub) to the front side of the spacer protrusion (where the spacer engages the center of the wheel).

Basically, the risk is having the center of the spacer be punched out.

[ldsbeaker]

well. I looked for BBS spacers. Couldn't really find anything.
HOWEVER I did fill out a custom quote on wheeladapter.com, and no shit, less than 5 minutes later this 71 year old man calls me back on the phone.
We yakked for about 2 minutes about the spacers (he sounds like he knows his shit), and told me he will make CUSTOM spacers to go on my car. $60 a piece. ($$!!) Then, since I gave him my work email, he asked about me, and we ended up talking about the war and stuff for about 5 minutes. He just emailed me back, too.
I don't think I can keep up with this septegenarian!!

[ldsbeaker]

reheheheally. brb.

[E30 Racer]

Why? measure your hub.

Or switch to studs so you don't even have to bother with being hubcentric. ;)

Not a good idea. You really want to maintain a hubcentric relationship, even with studs. Studs just make mounting/dismounting wheels a bit easier.

BTW, BBS makes 10mm spacers. Expensive ($90), but they should still be available through BBS directly.

[AlarmedBread]

They totally don't have a lip on the inside to "carry" the wheel.
I want a spacer like they have in 15mm, just 10.

Why? measure your hub.

Or switch to studs so you don't even have to bother with being hubcentric. ;)

[1991 e30 bmw 318is]

Definitely better to call for something like that.

ya i tried but there not open. ill call Monday.

[ldsbeaker]

Definitely better to call for something like that.