GB - Ground Control stuff

[Jean]

platanos - front/rear set with 4 springs and 4 adjusters. a friend of mine just registered and waiting for email confirmation to answer any questions and check what is in stock etc.

There is still room, due this friday unless we don't get 10 people in.

[platanos]

I'm assuming there is no way to get just 2 springs and adjusters? I have to figure out what spring rate is best for me...

[platanos]

So with two days left, do we actually have ten people in on this? I kinda need to know cause I need to get this asap. It would be nice to save some money but if we don't have enough people, I will just go ahead and order the kit from GC.

[sk8ercof316]

So with two days left, do we actually have ten people in on this? I kinda need to know cause I need to get this asap. It would be nice to save some money but if we don't have enough people, I will just go ahead and order the kit from GC.

I don't know why Jean isn't replying. But, I don't think you will be able to get 2 springs and adjusters. It comes as a whole setup for front and back and then you have to buy the adjustable camber plates separate. You could buy the 2 adjustable camber plates, because that is all you get, is 2. The camber plates are for the front only.

[318isbmw]

I don't know why Jean isn't replying. But, I don't think you will be able to get 2 springs and adjusters. It comes as a whole setup for front and back and then you have to buy the adjustable camber plates separate. You could buy the 2 adjustable camber plates, because that is all you get, is 2. The camber plates are for the front only.

Give it time. Jean has a life so I'm sure he's not at his computer 24/7 to check r3v.

[E3Xowner]

platanos - front/rear set with 4 springs and 4 adjusters. a friend of mine just registered and waiting for email confirmation to answer any questions and check what is in stock etc.

There is still room, due this friday unless we don't get 10 people in.

Ok, that person he's waiting on is me. I was finally able to register and post here. Let's get a tally of who is in/out and what they are looking for specifically.

If you know what you want, ie, spring rates/lengths and understand the principles of suspension tuning, that's great. Specify what you're looking for. (chassis info, damper info., spring rate f/r, spring length front rear). I will review all requests to make sure that the request is within reason.

If you are unsure of what you want, that's ok too. Just message me and I can figure out the best option for you.

By the way, let's just keep it to full kits right now. Half kits gets confusing and complicated.

[E30nate]

Ok, that person he's waiting on is me. I was finally able to register and post here. Let's get a tally of who is in/out and what they are looking for specifically.

If you know what you want, ie, spring rates/lengths and understand the principles of suspension tuning, that's great. Specify what you're looking for. (chassis info, damper info., spring rate f/r, spring length front rear). I will review all requests to make sure that the request is within reason.

If you are unsure of what you want, that's ok too. Just message me and I can figure out the best option for you.

By the way, let's just keep it to full kits right now. Half kits gets confusing and complicated.

im for sure in for some coilovers. i know i want 400/600 spring rates, but i dont know what length. we were never informed on our choices for length.

[E3Xowner]

sent you a PM.

[crunk3]

im for sure in for some coilovers. i know i want 400/600 spring rates, but i dont know what length. we were never informed on our choices for length.

Im in the same boat as Nate, Id like a 450/650 kit but i'm unsure of the length

[platanos]

I'll take 400/600. What are my length options?

[E3Xowner]

Please also provide the damper info. Rather than spec length, let's talk about primary use. 450/650 is pretty much a track day setup and not very accomodating for street use. You'll also need appropriate dampers to control the spring energy as well.

So lets do this and just add to the list. Thanks!
username
car/chassis
damper info
intended purpose (street/autox/trackday)

1. E30Nate
car?
damper info?
intended purpose?
looking for 400/600

2. crunk3
car?
damper info?
intended purpose?
looking for 450/650

3. plantos
car?
damper info?
intended purpose?
looking for 400/600

4.
5.
6.
7.
8.
9.
10.

[Jean]

Finally :)

So here is the list of guys interested, and we need more info as mentioned above.

budnunta - coils
eric - camber
e30nate - coils
bm5w - coils
kwaaahhh - coils
crunk - coils
e30 groupie - coils
same30e - coils
318isbmw - coils
10. sumyungguy - coils

[E30nate]

Please also provide the damper info. Rather than spec length, let's talk about primary use. 450/650 is pretty much a track day setup and not very accomodating for street use. You'll also need appropriate dampers to control the spring energy as well.

So lets do this and just add to the list. Thanks!
username
car/chassis
damper info
intended purpose (street/autox/trackday)

1. E30Nate
car: 1991 318is
damper info: bilstein sports
intended purpose: spirited driving/ occasional auto x
looking for 400/600

2. crunk3
car?
damper info?
intended purpose?
looking for 450/650

3. plantos
car?
damper info?
intended purpose?
looking for 400/600

4.
5.
6.
7.
8.
9.
10.

[crunk3]

Please also provide the damper info. Rather than spec length, let's talk about primary use. 450/650 is pretty much a track day setup and not very accomodating for street use. You'll also need appropriate dampers to control the spring energy as well.

So lets do this and just add to the list. Thanks!
username
car/chassis
damper info
intended purpose (street/autox/trackday)

1. E30Nate
car?
damper info?
intended purpose?
looking for 400/600

2. crunk3
car: 1991 318is
damper info: bilstein sports
intended purpose: spirited driving/ occasional auto x
looking for 400/600

3. plantos
car?
damper info?
intended purpose?
looking for 400/600

4.
5.
6.
7.
8.
9.
10.

[318isbmw]

Please also provide the damper info. Rather than spec length, let's talk about primary use. 450/650 is pretty much a track day setup and not very accomodating for street use. You'll also need appropriate dampers to control the spring energy as well.

So lets do this and just add to the list. Thanks!
username
car/chassis
damper info
intended purpose (street/autox/trackday)

1. E30Nate
car?
damper info?
intended purpose?
looking for 400/600

2. crunk3
car?
damper info?
intended purpose?
looking for 450/650

3. plantos
car?
damper info?
intended purpose?
looking for 400/600

4.318isbmw
looking for 375/475
Street with lots of spirited driving, possibly some autox
bilstein sport shocks on the car...
5.
6.
7.
8.
9.
10.