Feeler: Sub X Brace Group Buy Discount.

[DCColegrove]

The production cost on these is pretty high (Labor intensive complicated...Suprizingly difficult to build)

We know that $300 + bucks is a lot of cash.

John and I have been discussing it and are considering offering 10 or more steel X brace orders to you guys on R3V at a big discount

To get the cost down we could do something like this:

Unfinished (unpainted) and get your own hardware (we will let you know what to use) For some place in the neiborhood of $225 + shipping (only US lower 48 would be about 25 to 40 bucks or so)


:?: THIS IS A FEELER we are not sure we can do this yet :?:



Let me know what you guys think.

bmw e30 chassis X brace is available here: http://www.bmwzenperformance.com/e30-products.html

[Fidhle007]

Depending on what I decide to do with my brakes I might have to be baller and do this...

[paddyhart]

Could stiffen up my cabrio...

[golde30]

i dont recall, but this bar mounts to the CAB bolts and where again? im interested at that GB price.

[DCColegrove]

i dont recall, but this bar mounts to the CAB bolts and where again? im interested at that GB price.

[Brian D]

$225 would be very do-able.

[NcTurnL]

I could be in...

[Mossman]

I would love to hear a before and after testimonial from a local r3ver who isn't affiliated with your shop, but I'm probably in even if you don't get that. That's definitely the way I'd prefer to buy it, BYOP&H (paint and hardware)

[Fidhle007]

Sam, sponsor me and I'll give you feedback! :razz:

Actually, you pretty much already do I think...

[DCColegrove]

Hmmm, There are a few out there possibly they'll chime in.

(The only people affiliated in this endeavor are John and I... Two one man shows collaborating.)

[GotCone?]

how about unfinished, but w/ hardware?

[Bimmerman325i]

I am also tentatively interested if someone has a review posted. I like the design and idea of it, I just need to get some money first.

[bwh13]

Will it fit with the skid plate I just put on? Front attachment point of the X brace is the same as the rear points on the skid plate...I also have the Ireland sway bar which might hang down too far and intefere with the X brace.

[DCColegrove]

Will it fit with the skid plate I just put on? Front attachment point of the X brace is the same as the rear points on the skid plate...I also have the Ireland sway bar which might hang down too far and intefere with the X brace.

I do believe they will fit with the skid plate installed however I don't know how far your bar hangs down.

[z31maniac]

how about unfinished, but w/ hardware?

+1

Also, any problem fitting around the H&R front sway? I'm thinking of going to that from my Eibach.