GB: Schrick Cams
Collapse
X
-
I think I can get the price to stay the same. I've heard from two people so far!!Leave a comment:
-
Awesome Dean and thanks for setting this up for us, really apreciated.
Assuming we are 8-9 people ready to order, the price will remain? I think 1 or 2 persons went other way or jsut bought it directly at regular price.
I'm in!Leave a comment:
-
Update:
Ok Guys, here it is.
Assuming we get 10 cams together for this shipment, each M20 cam currently costs $379 USD. If using Paypal, the price is $394. (Fees must be covered as I am doing this as a service to the e30 community and not for profit). I accept Cash, Money order, Bank transfer, or of course Paypal.
-3-5 day shipping to US destination in the lower 48 is $17. Priority Mail International (7-10 days) please email me with the information requested below for an exact quote if your estimate is not seen here:
>South America: $60
>Australia: One cam $60, Two cams $90
>Europe: $60
Important: I have not ordered anything yet. Due to the fluctuating dollar, all orders must be paid for by the end of this week so I can place the order and pay for it to lock in the price. Now that I have the attention of "Mr. Schrick", I trust that we can close this deal soon and make everyone happy.
If you are ready to go and want to move ahead, please email me directly at rcdude85 at yahoo dot com. Please include the following information:
-Full name and address.
-Forum and Screen Name
-Desired M20 cam profile
-Desired Payment method.
I will respond with a total and add your cam to the order.Last edited by deansbimmer; 09-24-2008, 09:19 PM.Leave a comment:
-
Yeah, ill jump on board for some more catcam goodness at that price for sure. They have always been known as people who will do deals for a few cams, the prices drop a fair bit.Leave a comment:
-
I am finally getting some Play from Denon. I have initial numbers which are a bit higher than anticipated but are based on singles. Let me see if I can get them down to a solid bulk order price to report to you guys.Leave a comment:
-
Yeah, im going to wait till next week too, then im taking my business elsewhere because this is happening way too slow. The dollar has dropped 15c waiting for this to happen, that might not seem like much, but to purchase both you are now talking $150 which isnt small change. I want to buy before anything else happens.
Me too. I don't want o mix or mess up this thread with Schrick and Cat Cams, but way before I made thsi thread, Ii tried to contact Cat Cam to buy just one, but the shipping was too high that was going to be petty much the same as Schrick Cam. They replied like 1.5 weeks later, then I asked what if we could be like 10-9 people for the m20 and go this:
Then...Hello Diego,
my apologies for the late reply. I have updated the list for the M20 engine: you will find 1300537 which I have created for your application.
- 1x 1300537 camshaft: USD 290 /pc
- 8x PAC-D95009 double valve spring: USD 14 /pc
- 1x UPS shipping: USD 190
- prepayment by bank transfer only (no credit card)
About the valve springs: when using PAC-D95009 double valve springs on STD retainers, you will need to use an extra shim (2-3mm) below the spring to get the correct spring load.
After your confirmation, we will send a pro forma invoice and payment instructions.
Watcha think?Diego,
here is what we can do:
parts:
- 10x 1300537 camshafts: USD 290 /pc
- 80x PAC-D95009 double valve springs: USD 14 /pc
- 80x 99425/O lower retainer: free
- we will provide extra lower retainers for increased spring load (no extra cost)
- you get a discount of 5% on the parts (parts total: USD 3819,00)
- all parts need to be invoiced and shipped to 1 person/company (over day delivery!)
- estimated shipping cost to Florida (US) will be USD 390 (UPS Expedited, including insurance for loss or damage)
- I need complete address to doublecheck the shipping cost (should be correct however)
- I have insured the shipping because we know from experience that the M20 cams are very sensitive in transport (1% of total cost)
I guess this should make the sun shine bright at your side of the Atlantic, please let me know.Leave a comment:
-
Yeah, im going to wait till next week too, then im taking my business elsewhere because this is happening way too slow. The dollar has dropped 15c waiting for this to happen, that might not seem like much, but to purchase both you are now talking $150 which isnt small change. I want to buy before anything else happens.Leave a comment:
-
It's OK man. Thanks anyways. We are waiting word from Dean, he it's back this week and it's trying to get a final deal with the Schrick man. Trsut me, I'm in a rush with this.Leave a comment:
-
Sorry to mess around but I am out, I thought because of the amount of people on the list this would be moving a bit quicker
I can't wait on this as I need to get my motor finished...I purchased a 288 today
Sorry for the inconvenienceLeave a comment:
-
293 from catcams. Or, well, it would have been if it didnt turn up broken in 2 pieces, so I made my own :)

Your 304 is probably the definition of aggressive (though there is a bigger option). It still has 7.7mm of valve lift but a really tight lsa, so its probably going to be peaky. 4mm of lift at TDC is pretty darn big, wait till you look at the lobe spacing in person.
Personally (nothing against the group buy or schrick products), if you want the lift of the 304 cam, Id probably look at a catcams 293 and benefit from the wider lsa.Leave a comment:
-
Diegom6: M20 - 288
Madhatter: M20 - 272/284
Madhatter: M20 - 288
DragonOrta: M20 - 288
Ruffian: M20 - 288
dark89e30: M20 - 288 (new added from R3V)
josh87is : -m20-272
nando : M20 - 304 (R3V)
tn325i : m20 - 288 or 284
Dyno4mance : M20 - 288
Sorry, my isp was f'ed on the server end of things and I wasn't able to get to R3v.Leave a comment:
-
We are waiting for Dean's reply, he is trying to contact the man of Schrick (wich he knows him) to get a final price, and once it's done, he will reply here to provide full info for payment, shipping, etc.Leave a comment:
-
-
Thanks....How many more do we need and when are we expected to Paypay you the money?Leave a comment:

Leave a comment: