If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
So thats 250 next month and another 250 in jan-feb ish. Count me in.
No... 50% of the total due at end of GB. Rest will be payed when wheels arrive and ready to be shipped. If you buy all 16x9($245.00 each)....The deposit will be $490.00.
Thanks.
I'm very much interested in this group buy, but Australia is a bit wank. We cant have wheels that poke out further than the fender. Will 16x9's on the rear poke out further than the fender? Or will we have to roll + pull them ?
I'm very much interested in this group buy, but Australia is a bit wank. We cant have wheels that poke out further than the fender. Will 16x9's on the rear poke out further than the fender? Or will we have to roll + pull them ?
16x9 will be have a bit of "poke" but it will clear fine with the right tire size.You might need to roll the rears.. Depending on the tires you use.
I'm very much interested in this group buy, but Australia is a bit wank. We cant have wheels that poke out further than the fender. Will 16x9's on the rear poke out further than the fender? Or will we have to roll + pull them ?
Well if this helps here are some pictures of some Keskins in 16x9 et15 under a late model. Imagine these but 5mm further out..
(Keep in mind that If they make the wheels in et15, you will almost definitely need a spacer up front)
It's obvious you would have to roll your fenders, but you wouldn't have to pull them unless you wanted fat tires and a dumped ride hight.. Even that wouldn't necessarily be required on an early model with high arches like yours.
You have an 89 yes? So your fitments would be the same as that^ but 5 mm further out.. that's still within the fender line.. No Police officer will hassle you for that. Even if with tires it's a few mm "poked".
wouldnt these rub like a bitch with decent size rear tires?? i have an m3 with the rear of 9.5 and i have 245s...thinking to put 205s would be ridiculously sretched? i has some sportmax 16x8 et 15...i had 215/45/16 falken 615 and the rears rubbed. thinking of another 5mm more and another inch of wheel...
how much fender rolling would be need and i would probably would want at least a 225 tire on the back...
You'd have to do a lot of rolling. Might not need to pull, but you will need to significantly roll to pull off 225s. And a fairly stiff suspension depending in your ride height.
Comment