IS splitter Group Buy

[E30_fiend]

I'd agree, w/ the extensions, may be a bit much.

alright then, put me down for the 1" splitters then.



thanks





Taylor

[318isbmw]

alright then, put me down for the 1" splitters then.

thanks

Taylor

Gotcha down for the 1"

Any others, only need 3 more...

[E30_fiend]

free bump

[Fidhle007]

You can NEVER have enough splitter!

The new toy is on and looks great! Bump for a fantastic seller!

[Uber E30]

Does this price apply to the super long ones or just the standard ones? Also will i run into any clearance issues with the long one on a 24v with skidplate?

[ethirtydavid]

I'm interested, but can we get a better picture of these?

there looks like a couple gaps there? does it fit flush - or is this similar to buying e30 carbon hood?

thanks

[318isbmw]

Does this price apply to the super long ones or just the standard ones? Also will i run into any clearance issues with the long one on a 24v with skidplate?

These are just the standard ones. For $10 more I'll do one of the full ones though... Not sure on a skidplate and issues there. I know fidhle was able to just bend the back down w/ some heat w/ his s52 to make it avoid the oil pan. Very close, but w/ some trimming can work.
Edit: just edited my first post to include the full splitters for 10 extra.

[318isbmw]

I'm interested, but can we get a better picture of these?

there looks like a couple gaps there? does it fit flush - or is this similar to buying e30 carbon hood?

thanks

Those gaps are just from the bolts on there. I do all of the bends with my is lip which is about 2 years old so its not warped. If you look close it was wet in that picture so its a little bit off. More pictures can be found here, and let me know if those don't fit the bill, because I can take whatever detailed pictures you would like to see. Pictures!!

[Fidhle007]

These fit really well and if you're brave you can mount them with glue and rivets like I did for absolutely NO gaps. There's about 2" of overlap with the 24v skidplate which could be trimmed but in my case I used a heat gun to form it around the skidplate and fastened it with some zip ties. Make sure your clips are solid though because with the full undertray there's enough leverage to break them if you hit something. Or, in special situations which should not be attempted on public roads, downforce can be a factor... :D

[318isbmw]

These fit really well and if you're brave you can mount them with glue and rivets like I did for absolutely NO gaps. There's about 2" of overlap with the 24v skidplate which could be trimmed but in my case I used a heat gun to form it around the skidplate and fastened it with some zip ties. Make sure your clips are solid though because with the full undertray there's enough leverage to break them if you hit something. Or, in special situations which should not be attempted on public roads, downforce can be a factor... :D

Thanks for posting up the details of doing the full splitters.

[Fidhle007]

No worries, Brendan! I have some pictures of the underside from both installs, I just have to find them. I also have pictures of my current setup but I still need to resize them. :pimp:

[T Verdier]

What about my lip any 87 valence splitters available for less cost?

[318isbmw]

What about my lip any 87 valence splitters available for less cost?

Sorry, I'm the only local e30 guy, and don't have access to any early cars to make a template off of. Possibly will have one in 3 or so weeks. I'll let you know when I do.

[318isbmw]

Bump

[318isbmw]

Here's a 1.5" w/ KA's extension's on. Just for future reference for anyone