IS splitter Group Buy

[T Verdier]

What about my lip any 87 valence splitters available for less cost?

[Fidhle007]

No worries, Brendan! I have some pictures of the underside from both installs, I just have to find them. I also have pictures of my current setup but I still need to resize them. :pimp:

[318isbmw]

These fit really well and if you're brave you can mount them with glue and rivets like I did for absolutely NO gaps. There's about 2" of overlap with the 24v skidplate which could be trimmed but in my case I used a heat gun to form it around the skidplate and fastened it with some zip ties. Make sure your clips are solid though because with the full undertray there's enough leverage to break them if you hit something. Or, in special situations which should not be attempted on public roads, downforce can be a factor... :D

Thanks for posting up the details of doing the full splitters.

[Fidhle007]

These fit really well and if you're brave you can mount them with glue and rivets like I did for absolutely NO gaps. There's about 2" of overlap with the 24v skidplate which could be trimmed but in my case I used a heat gun to form it around the skidplate and fastened it with some zip ties. Make sure your clips are solid though because with the full undertray there's enough leverage to break them if you hit something. Or, in special situations which should not be attempted on public roads, downforce can be a factor... :D

[318isbmw]

I'm interested, but can we get a better picture of these?

there looks like a couple gaps there? does it fit flush - or is this similar to buying e30 carbon hood?

thanks

Those gaps are just from the bolts on there. I do all of the bends with my is lip which is about 2 years old so its not warped. If you look close it was wet in that picture so its a little bit off. More pictures can be found here, and let me know if those don't fit the bill, because I can take whatever detailed pictures you would like to see. Pictures!!

[318isbmw]

Does this price apply to the super long ones or just the standard ones? Also will i run into any clearance issues with the long one on a 24v with skidplate?

These are just the standard ones. For $10 more I'll do one of the full ones though... Not sure on a skidplate and issues there. I know fidhle was able to just bend the back down w/ some heat w/ his s52 to make it avoid the oil pan. Very close, but w/ some trimming can work.
Edit: just edited my first post to include the full splitters for 10 extra.

[ethirtydavid]

I'm interested, but can we get a better picture of these?

there looks like a couple gaps there? does it fit flush - or is this similar to buying e30 carbon hood?

thanks

[Uber E30]

Does this price apply to the super long ones or just the standard ones? Also will i run into any clearance issues with the long one on a 24v with skidplate?

[Fidhle007]

You can NEVER have enough splitter!

The new toy is on and looks great! Bump for a fantastic seller!

[E30_fiend]

free bump

[318isbmw]

alright then, put me down for the 1" splitters then.

thanks

Taylor

Gotcha down for the 1"

Any others, only need 3 more...

[E30_fiend]

I'd agree, w/ the extensions, may be a bit much.

alright then, put me down for the 1" splitters then.



thanks





Taylor

[Stephen]

Not that I know of, but I think it'd look like it had missing front teeth since it curves under in the middle. Would accent that.

True true. oh well..

[318isbmw]

Has anyone played aroind with maybe just a splitter extenision type deal on the volvo lips? Just thinking out loud here

Not that I know of, but I think it'd look like it had missing front teeth since it curves under in the middle. Would accent that.

[Stephen]

Has anyone played aroind with maybe just a splitter extenision type deal on the volvo lips? Just thinking out loud here