Massive - Dead pedals

[Massive Lee]

Hi Newman.

I suggest you make your own and offer them for free.

Thanks

Lee

[newman]

Why wouldn't you weld the joint where the sides meet the top? You have a huge gusset in there that is doing almost NOTHING, other than looking pretty. Even a 1/4 long weld would add TONS of strength.

(this is regarding all styles before the current)

Also, i know stainless has gone up in price, but, shit... 75 bucks? that's a nice margin. ;)

The last style rest still puts the entire load as a moment about the axis of the bend of the "leg". A little gussetting would go a long way. The part that you copied has a stamped rib that creates a coplanar loading, and will likely be much stronger, despite the fact that it's probably a higher gauge (thinner) mild steel.

[Massive Lee]

[cactusjacks1]

So how do these attach? I'm assuming the Mtech style uses factory mounting points?

Two screws in the speaker mount (remove the kick panel as the holes are already pre
drilled around the speaker mount hole). The clutch stop button under the steering column (remove the button bolt, position the hole from the pedal, reinstall the button bolt). It's at 15 min. DIY job at the most.

[Mtriple]

So how do these attach? I'm assuming the Mtech style uses factory mounting points?

[Massive Lee]

As promised. Here's the latest footrest. It was much more involved to produce than the previous units. Two versions are available. Plain and drilled. They will NOT be sold powder coated, so if you want to add color, it is up to you. Shows us pictures of your pink footrest...

Price is $85usd + $20usd shipping to reflect the higher cost of manufacturing and higher shipping costs. The Hartge-styled pedals will stay $75usd on this first batch. Now $20usd to ship too.

Paypal to massivebrakes@gmail.com

[Massive Lee]

Lee, are you going to be making an M-Tech type dead pedal as well?

Coming on Friday.

Lee

[DragonOrta]

Lee, are you going to be making an M-Tech type dead pedal as well?

[Massive Lee]

Doug M.
Craig F.

Parts are shipped. 5 days shipping by air.

Let us know the fit when you get them. Don't be shy, send us pictures.

[Massive Lee]

Dang. Any chance I could get the spacing measurements on the tabs in an effort to see what needs to be done to fit it in an E30?

Hole spacing

Front to rear - 8"
Front left to front right - 6-3/4"
Rear left to left right - 9-7/8"

[bmwpower]

The floor plates are generic race parts.

Dang. Any chance I could get the spacing measurements on the tabs in an effort to see what needs to be done to fit it in an E30?

[Massive Lee]

The floor plates are generic race parts.

[bmwpower]

Lee,
Is the floor plate made for the E30 or is it generic? ie, will the tabs (I noticed they're not equally spaced) fall in the right spots to make it install friendly?

[Massive Lee]

Lee,
Would it be possible to mount the new style pedal WITHOUT carpeting? Seems like it's a little taller and wider than the racer version. Wondering if that would be an advantage

The Hartge unit is indeed taller and if you do not have a roll cage with tubes gong thru the firewall, the Hartge should fit over the wheel well bump for cars without carpeting.

KingB - UPS SUCKS - I only ship US Postal/Canada Post because you wllnot be charged any extorsionist broker fee...:curse:

Also, I will let people paint/powder coat the dead pedals themselve. It will end up being cheaper for you.

Lee

[Kingb]

Lee looks awsome. I just wanna see the MTech ones tomorrow or the day after. I will be getting one from you. Do you ship USPS or only UPS?