Shop's in the New York Area for E30 M3 swaps?

[Sharkbite2000]

Hi, I've been trying to do reseach on shop's in New York that are able to do these projects.

Plans are 1992 325CI / M50/52 ? don't know I'm trying to get knowledge on what engine to go with I see the euro one's pull out good hp numbers.

Any info would be appreciated , thanks.

[Sharkbite2000]

I guess no one.....

[ME30W]

First choice would be guten in maplewood, nj. Best e30 guys in the area, without a doubt. Another shop is motorcepts in queens, but ive never taken my car there so can't personally recommend.

But i do believe guten is done with 24v swaps, more focused on building m20's these days. Go all out and get a 3.0 l m20, thats my advice

[Sharkbite2000]

How much power will I be able to squeeze out of a M20? is it not worth the swap?

[FredK]

A recent project 3.1L M20 here on r3v dynoed at 210 whp, which is a lot of power from an M20.

It will be very expensive to have a shop rebuild and install a custom stroker engine into your car.

I'm not sure what your budget for this swap is, but a stroker engine by itself could easily run a few thousand dollars in parts and machining.

[Roysneon]

First choice would be guten in maplewood, nj. Best e30 guys in the area, without a doubt. Another shop is motorcepts in queens, but ive never taken my car there so can't personally recommend.

But i do believe guten is done with 24v swaps, more focused on building m20's these days. Go all out and get a 3.0 l m20, thats my advice

Guten will do whatever the customer pays for. They will take very good care of you.

It's going to be expensive to pay for labour for a swap. It's not all that hard to do yourself if you have the time and space.

[DontWriteGraff]

Motorcepts has done countless amount. The shop car is a VF supercharged s54 e30M.

[Convertible Dirtz]

///MotorCepts ask for Leo in (Queens NY) 347-644-5363
///AutoCraft ask for AJ (Uniondale NY) 516-505-5090
//AzevedoMotorSports ask for Rui (Linden NJ) 908 925 3157

pick your poison xxx