Will this setup work?

[mach schnell]

- M50 motor
- Green hex E28 mounts, no spacers
- Ebay Supersprint replica headers
- OBD-I factory center section
- Aftermarket E36 exhaust
- Stock CAB brackets with offset CAB's

Will that setup work and clear the subframe + CAB's?

Thanks!!

[rThor432]

Doubt it. Try the M5 mounts, they are a bit taller (I think 1/2"). Mine worked with no spacers, for clarification.

[mach schnell]

Doubt it. Try the M5 mounts, they are a bit taller (I think 1/2").

Ok, will do.

Any other comments?

[Mako18]

My treehouse lollipops are close with the rep headers and e28 mounts (no spacers). I think you might have an issue with the stock cabs.

Exhaust should work without much hassle. Should sound nice and quite.

[tonytony]

e28 mounts will work with a couple of washers