Im an idiot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • StreuB1
    Advanced Member
    • Sep 2007
    • 113

    #1

    Im an idiot

    I installed the MAF backwards.

    :hitler:



    Stock chip runs fab, TRM chip runs even better. Car drives great and is very quick. VERY torquey.

    Only issue is my temp gauge isnt reading. I tap it and it hops up to ready....like all e30's lol. But never goes higher than that. Also the aux fan isnt working. Jumper it out and it runs but then pops the fuse. Noticed the fuse was popped before the swap also. hmmmmm.
    I like to build things with metal n stuff
  • FredK
    R3V OG
    • Oct 2003
    • 14745

    #2
    Originally posted by StreuB1
    I installed the MAF backwards.
    :drink:

    Comment

    • StreuB1
      Advanced Member
      • Sep 2007
      • 113

      #3
      hahahahaha!!! Yeah man I know. A week of sulking because the car didnt run worth a shit all because it was backwards. lol. So, all in all. Everything was perfect....except the execution of a key aspect.

      Any ideas on the temp gauge not reading?? Im dead positive I got the right wire off the sensor....checked it before hand with a meter and everthing just to make sure.

      Though, I thought I put the MAF on the right way also. :roll:
      I like to build things with metal n stuff

      Comment

      • bostonbmw
        E30 Addict
        • Nov 2004
        • 429

        #4
        I noticed my temp gauge rises VERY slowly right up to normal temp

        Comment

        Working...