Pilot bearing?

[MR 325]

Use the pilot bearing to match the transmission, simple as that.

[MattM]

ill be nice

http://www.realoem.com/bmw/showparts...37&hg=11&fg=20

#1

[Uber E30]

Anyone have a link to the exact pilot bearing I need for a getrag 260 to S50 swap?

http://lmgtfy.com/?q=realoem

[MR E30 325is]

Anyone have a link to the exact pilot bearing I need for a getrag 260 to S50 swap?

[JGood]

so i am assumming since i am using the getrag off the M20 i am going to want the smaller ID which would match up to the getrag shaft, is this correct?

That is correct.

[tonytony]

get the m20 pilot bearing, the inside race of the m50 pilot bearing from the zf tranny is too big

[MattM]

Well, i was about to order a new pilot bearing for my car, just realized that the M50 and M20 are different. I am using the getrag 260 on the M50, so do i get the M50's pilot bearing or the M20's?

well, the M50's is 15x32x10
and the M20's is 12x32x10

so i am assumming since i am using the getrag off the M20 i am going to want the smaller ID which would match up to the getrag shaft, is this correct?