Driveshaft Woes and Wonders???????????

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bmw320e21
    Member
    • Jan 2005
    • 67

    #16
    I had a e90 come in for harsh vibration under wot and it turned out to be heat spots on the flywheel. You might wanna check that out too.


    Adam

    Comment

    • jahnaboi
      E30 Mastermind
      • Oct 2006
      • 1742

      #17
      Its all figured out. Thanks.

      SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

      Comment

      • Jason89i
        E30 Modder
        • Sep 2004
        • 875

        #18
        sssooooo. what was it?

        Comment

        • D-rock
          Mod Crazy
          • Mar 2009
          • 714

          #19
          My car did the same thing...

          Comment

          • jahnaboi
            E30 Mastermind
            • Oct 2006
            • 1742

            #20
            Was the flex disk. Had hairline cracks on it that were not visible at a resting position. Only noticeable if you put two bolts in two holes and pulled them apart acting as if there was load put upon it (like how it is on the car).

            SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

            Comment

            • MIKe30
              R3VLimited
              • Sep 2006
              • 2334

              #21
              Originally posted by jahnaboi
              Was the flex disk. Had hairline cracks on it that were not visible at a resting position. Only noticeable if you put two bolts in two holes and pulled them apart acting as if there was load put upon it (like how it is on the car).

              sheesh, thats frustrating. glad you found it though.

              Comment

              • jahnaboi
                E30 Mastermind
                • Oct 2006
                • 1742

                #22
                Originally posted by MIKe30
                sheesh, thats frustrating. glad you found it though.
                Seriously... very frustrating. I only figured it out because I saw that my painted selector rod had the paint stripped at a certain point from where the flex disk under load was expanding and rubbing against it.

                SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

                Comment

                Working...