Well i am just finishing up the last components of my swap, but i dont have any oem hose.. how much pressure is there between the master and the resivoir? can i use use some ordinary plastic hose? also between the resivoir and the clutch...
-
not much pressure in there, not much to make a difference anyway. I woudln't use a regular hose though, find a dedicated hose made for brake fluid. Probably find it at the dealer. I used a DSM remote reservior and using the lines that came with it and i have a sperate reservior for the clutch and reused the stock clutch hose from the old stock reservior -
x2, the only pressure in those lines is overflow and gravity. Its more important just to use a line that is compatible with brake fluid.sigpicComment
-
Clutch Line Hoses
Use OEM set up on the hose in-between the slaves it is Hi pressure.
GLComment
-
yeah, i got all the highpressure stuff oem, this is only for between the masters and resivoir..(clutch and brake) i went to lordco and the guy recommended just normal fuel hose, so i got some of thatComment
-
I would advise against that because brake fluid will soften and sweat through the fuel line, fuel hoses are made with nitrile or buna-N rubber which is incompatible with brake fluid. Look for hoses that are made with either EPDM rubber or SBR rubber which is brake fluid compatibleComment
Comment