Heater Hose Question...

[evil_twin]

anybody have their intake manifold taken off? I'm trying to route my heater hose back so I have heat and coolant going to my heater core. But I can't get the right routing. Anybody have it or have a good picture of it? right now I have the T going to the front of the motor and to the rear of the motor, and the 3rd part going to the overflow tank. Where does the heater core get mixed in this mess?

[MattM]

the main long line goes between the water pump and the heater core, teh large T off the hose goes to overflow, and the small goes to TB.

the one on the back of the block also goes to the heater core

here is a picture i have from awhile back



the 2 hoses with arrows ( 8 )are heater core connections, also (15) you can go straight from the block to the throttle body, that thermostat is not used in swapped cars, also the hose from that back of the engine goes to the bottom core fitting, the spider hose/main hose goes to the top.

[evil_twin]

Hmmm, I'm not sure that my heater routing looks like that at all...

So from the back of the block to the heater core. Heater core to #6?

Everything else is working, I just didn't know where I T'd off everything.