Granaded s52... help appreciated

[gazellebeigem3]

The spec is 0.5 bar minimum with oil at operating temp.

I'm in the same boat with my oil pump nut. Red loctite. I'll definitely be pulling my oil pan this spring and safety wiring it.

me too... i have a gauge and still am uneasy after reading this post

[Brew]

im on the same page zach, I just got done reading this. The thought of my OPN being locktighted gave me a sour feeling in my gut.

I suppose i better install a Oil Pressure Gauge before i start having nightmares too. Does anyone know the actual oil pressure a S52 should be running at temp?

The spec is 0.5 bar minimum with oil at operating temp.

I'm in the same boat with my oil pump nut. Red loctite. I'll definitely be pulling my oil pan this spring and safety wiring it.

[etxxz]

this is how they are mounted. they are cheap mookeeh gauges which i chose for having electric senders. i don't have enough runtime/data to give them a review. You can buy them on ebay and see how they look/operate on youtube.

Where can i get a set of these? I need these for my M3 swap car. Also how tall are they? Stock e28 mount's E36 size or lower?

They look great!

Glad your car is back running.

they are about 1/4" lower than stock e28 mounts for the reason that they don't compress. They make my ebay headers clear the sway bar and an IX booster by more than my previous IE poly mounts. They do vibrate pretty hardcore. Since i paid to get them made, i'll be "accepting" some donations for the drawings. i'll pm you.

[mattdk318i]

im on the same page zach, I just got done reading this. The thought of my OPN being locktighted gave me a sour feeling in my gut.

I suppose i better install a Oil Pressure Gauge before i start having nightmares too. Does anyone know the actual oil pressure a S52 should be running at temp?

[Zacm829]

Can we see detailed pictures of the oil preussure gauge? Where did you get it from?

[b*saint]

My work is all about engineering tolerances. I bought home my micrometer and a thickness gauge ;) .. but i have to figure out if my crank has ever been machined before. doubt it, but i don't know where this engine's been. All i know is that it came out of a wrecked m-roadster with 115k miles. It had coilovers, sways, i/h/e and a tree in the passenger seat.

yes incredible.. seems like the sprocket may have jumped on and off. The splines are not damaged, but there is some scoring sorrounding the splines from the shaft.

this engine should be running again in under a month if my possibly unrealistic timelines work out. I hope most of you took care of this during your swap.. or that it encourages the rest of the 24valvers to take off their dresses and get into their respective oil pans.

You're such a fucking dork. "My work is all about engineering tolerances" Because all the monkeys who actually know how to build an engine plane the deck with a die grinder and use their arm as a torque wrench.

I am curious of the workmanship of your rebuild seeing you've never done it before.

[surebimmer]

sneak peek:

the less than stellar picture doesnt show the angles.

rebirth eta: saturday. new additions to rebuild: IE oil cap, oil temp, oil pressure, 11"x5"x2" oil

Where can i get a set of these? I need these for my M3 swap car. Also how tall are they? Stock e28 mount's E36 size or lower?

They look great!

Glad your car is back running.

[etxxz]

ooohh.... well that explains. i really did not know what to expect. I was cold running up and down the street a couple times at barely any throttle. I didnt want pissed off neighbors. This is a loud engine on open headers.. as most of you already know.

pics to come ; |

i'll do the bulk of my break in this weekend.

[Pudmunkie]

In my old life playing with 3 liter Duratec V6's 75psi on cold oil is fine. I would see upwards of 100psi until it came to temp.

[Brew]

second week of january baby!

took it out for a spin just now.. typical of me no hood and open headers down the nearest street. what a joy. The oil presure gauge is reading way above normal though. its marking around 75psi at idle. something is wrong. i don't think i hooked it up wrong. The temp gauge is working fine.

75 psi once the oil was up to temp or when cold?

[etxxz]

second week of january baby!

took it out for a spin just now.. typical of me no hood and open headers down the nearest street. what a joy. The oil presure gauge is reading way above normal though. its marking around 75psi at idle. something is wrong. i don't think i hooked it up wrong. The temp gauge is working fine.

[Spaz]

Congrats :D When do you get to enjoy it on the track again?

-Cam

[etxxz]

ITS ALIIIVEE!!! jajaja man i'm good. it fired right up

i love how the oil cooler is exactly the same height of the space behind our kidney grill. It looks friking awesome :finger:. Hammer time!!

:twisted:

Im waiting on some of my brake adapters and some AST 4100s and I will be warming up my oil with you.

woa nice christmas gift to yourself! ...i need to upgrade my barbie suspension.



SoLive: for the 10secs or so that it ran, the lifters made no complaints.

...and for the record. i used no timing tools. no camshaft lock, no flywheel lock, no vanos tools, no exhaust cam sprocket turner.. nada. My camshaft "timing" tool was a block of abs plastic and an angle bar.

thanks for the help those that did.
-etxx

[jrdeamicis]

ebay. $42.xx shipped. all AL.

not unless i see a need for it in the future. ie. oil too cool which i highly doubt this car will experience.

:twisted:

Im waiting on some of my brake adapters and some AST 4100s and I will be warming up my oil with you.

[etxxz]

ebay. $42.xx shipped. all AL.

No Thermostat?

not unless i see a need for it in the future. ie. oil too cool which i highly doubt this car will experience.