AKG Mount position

[herlsy]

So i've been putting my m50 in today, and i'm using the AKG swap mounts. For those have you that have used these before, was wondering if you could clarify the postion of the mounts for me.

See attached 5 year old artwork:



Currently i have my mounts in position 1. The fit is incredibly tight and the underside of the mount is not sitting flush with the subframe.

AKG was closed today so i was unable to get hold of them. Can anyone who has used these mounts before send me an image or just clarify which position is correct?

Cheers

[Dominic49]

mount them just as stock stud through the hole dowel in the slot

sometimes they dont sit flush if the subframe mounts are at all tweaked but they will settle after a bit.

[herlsy]

Thanks for the reply. Friend of mine has suggested the same thing, that they may settle.

Guess i'll keep them as is then

[7pilot]

Use stick figure #2 :p with the mount threads sitting like factory.

I'm using these.

m

[7pilot]

Here is a pic of the Right side.
See how the mount is molded to present a level platform for the engine mount bracket to seat on.

m

[herlsy]

Ahh shit ok, ive got them on wrong then!

Thanks for the replies