I plan on putting the motor and trans in tonight(as one assembly). I just want to make sure I have everything in place. Here is what I have:
93 M50:
Ebay Header w/ BMW gaskets
New spark plugs, valve cover gasket, oil pan gasket, fuel fliter, oil filter
E34 525i oil pan, dipstick tube, dipstick, oil pickup tube,throttle cable
E36 engine mount arms
E28 535i motor mounts
E30 starter
E30 radiator and hoses
E30 flywheel lightened, balanced and resurfaced, Sachs kit with alignment tool and pilot bearing
New slave, master and line for clutch
E21 modified booster
replaced shifter bushings
5 hours of ETM work for harness(if all is good on the harness I will remove it and install pins in the right location)
White325is trans crossmember
I think that is it.
Am I missing anything?
Thanks
93 M50:
Ebay Header w/ BMW gaskets
New spark plugs, valve cover gasket, oil pan gasket, fuel fliter, oil filter
E34 525i oil pan, dipstick tube, dipstick, oil pickup tube,throttle cable
E36 engine mount arms
E28 535i motor mounts
E30 starter
E30 radiator and hoses
E30 flywheel lightened, balanced and resurfaced, Sachs kit with alignment tool and pilot bearing
New slave, master and line for clutch
E21 modified booster
replaced shifter bushings
5 hours of ETM work for harness(if all is good on the harness I will remove it and install pins in the right location)
White325is trans crossmember
I think that is it.
Am I missing anything?
Thanks