M52 + G260.. again...

[ethrty]

just read a half dozen threads and cant seem to get a clear answer. im actually going to run a 240 but its from a euro e30 320i so still has the 10 degree issue so all the 260 stuff applies. It *think* an E21 mount on one side and an E30 auto mount on the other works from what ive read? can anyone confirm, deny or suggest otherwise? Seeing as i cant weld i would much rather this approach. thanks!

[zav3n]

m5x +getrag 240 + e30 clutch + euro 323i t/o bearing works just fine. i dunno what ur talking about the "10 degree or whatever" i have the STOCK brace and tranny mounts been running this setup for 2years +, as my daily driver...

[ethrty]

m5x +getrag 240 + e30 clutch + euro 323i t/o bearing works just fine. i dunno what ur talking about the "10 degree or whatever" i have the STOCK brace and tranny mounts been running this setup for 2years +, as my daily driver...

if you are from the states then your G240 isnt affected. however im running one from a euro M20/M40 engine though which has the same issue of needing a custom brace as the G260