Wire Harness cover?

[e30bri]

I tried searching and couldn't find much.... Car: 88 325is / s50.....Anywho I am wondering what people are using to cover the wire harness (on top of the intake manifold/valve cover). The e36 box is kinda bulky and my IE strut bar wont fit over it.....Thanks in advance for advice!

[Wh33lhop]

Everyone likes to use the M42/S14 harness cover. Not positive it'll clear your bar but that's the thing to do.

[rede30]

m42 cars and s14 cars had what you are looking for. You need the 318/m3 blower motor cover to attach them onto.

[JJe30]

Everyone likes to use the M42/S14 harness cover. Not positive it'll clear your bar but that's the thing to do.

That's what I used. Not sure what the IE bar looks like but mine fit with my Sparco bar.

[e30bri]

Thanks.Do you know the part number for that?

[White325is]

51711380390
51711380391
51711380392

[e30bri]

Awesome!! Thanks!

[lifeiskaos]

You need the 318/m3 blower motor cover to attach them onto.

What's different about them?

[herlsy]

What's different about them?

The 325i blower cover has extra studs coming out of it. They can be cut off/ground down though. Don't try and pop them off otherwise you'll leave small holes in the cover. Just don't cut the stud on the far top-left, you'll need it to mount the harness channel.

[asubimmer]

I have 2 of them if anyone is interested...