Quick DME Question: E34 403DME in E30??

[Moto-Mucci]

Sorry, I know this is probably answered all over the place, but I'm at work and don't have time to search / need a quick answer.

Are you able to use the 403 DME from a 92 E34 for the swap if that's where I'm getting the motor from?

From what I'm reading on e30dohc.com I need a 413 or 506..? Why is the 403 DME not listed as applicable for the E30 swap?

Thanks

[Jean]

403 (among others) is non vanos DME...413 is for vanos.

[Moto-Mucci]

yes, so I AM able to use the 403 DME for the non vanos M50 then?

[Jean]

Yes and 402 and 405.

http://www.pelicanparts.com/bmw/tech...DME-Repair.htm

[Moto-Mucci]

OK, thanks.
Someone should update the e30dohc.com info to clarify this.

[MattM]

whatever DME was with the engine will work in the swap, the DME doesnt care what chassis it was in.

[Moto-Mucci]

whatever DME was with the engine will work in the swap, the DME doesnt care what chassis it was in.

what I figured, thanks.

[MattM]

sorry, i must clairify for future, i was refering to non-vanos engines.. newer engines that have EWS are different and the silver label DME requires a chip to bypass the ews