Top mount turbo manifolds

[blunttech]

That is incredibly badass. Wow. No wonder you couldn't get the power down with the Euroweaves & Falkens! What trans are you running? Can the G260 handle that power? What about the driveshaft? diff? Axles? What do you do for engine management? What injectors do you use? Is there an intercooler? Do you use a thicker head gasket to lower the CR?

ZF with 2.93 LSD
Im on my second driveshaft First one tried to come thru the floor and tore a 5 inch gash in the tunnel.. I also sheered off the diff bolts a month ago.
stock axles .... TRM tune.....60lb siemens injectors Intercooler and a .140 MLS gasket

[Pipes]

That is incredibly badass. Wow. No wonder you couldn't get the power down with the Euroweaves & Falkens! What trans are you running? Can the G260 handle that power? What about the driveshaft? diff? Axles? What do you do for engine management? What injectors do you use? Is there an intercooler? Do you use a thicker head gasket to lower the CR?

[ZekeTheSneak]

I will be interested in a few months. Looking into turboing as we speak. Doing the MLS and Arps soon since the head is off.

[gkurey]

Sweet, thanks for the response...thats the type of picture I was looking for!

[Good & Tight]

No mods need to be made to the line the runs near the strut tower? That would be amazing...do you have any engine bay pics?

I designed these manifolds to work with A/C, so yes it will clear the stock line.
Here's a good pic with a/c lines. I brazed the E36 compressor outlet fittings to the E30 lines, worked perfect.

[blunttech]

Ok, sounds good. Thanks for the picture! What turbo are you running?

'
Garrett super 60

[gkurey]

Ok, sounds good. Thanks for the picture! What turbo are you running?

[DER E30]

lol yeah I can take some. Im going out there now anyways to clean the garage

its poring rain

WOW!!!

That is all, carry on with the awesomeness!

[blunttech]

lol I tore my ac out a month ago.. But trust me it fits fine... i had it in there for a year
I removed it and the power steering to try and lighten the front end up

[gkurey]

Sweet pic...where is the AC line???

[blunttech]

lol yeah I can take some. Im going out there now anyways to clean the garage

its poring rain

[bmwm42]

Engine bay pics blunt lol

[blunttech]

No mods need to be made to the line the runs near the strut tower? That would be amazing...do you have any engine back pics?

no it clears. What do you mean by "engine back pics"?

[gkurey]

No mods need to be made to the line the runs near the strut tower? That would be amazing...do you have any engine bay pics?

[blunttech]

Do these manifolds fit with AC at all? I have been searching for a picture of these manifolds installed on car with no turbo and can't really tell. Seems like it might work out OK...any comments appreciated!

Yes i have ac on my car Fits perfectly