Okay so I wanted to start some documentation here as I've finally collected (almost) all of my parts for this swap. Hoping for that lovely E30 ethusiast support that just about everyone on this site needs from time to time. So here's the skinny on my setup:
1987 325e coupe - Auto to Manual conversion
1991 525i M50NV with 405 DME - harness modded by MrEricT
1992 Getrag 250 5-speed transmission with matching manual driveshaft
M20 single mass flywheel and starter
E36 mount arms with E28 535i green mounts and 2x 320i trans mounts
E36 M42 radiator with internal expansion tank
New waterpump, t-stat, belts, gaskets, etc.
OBD2 manifolds with OBD1 downpipes
Relocating factory booster 1/2"-3/4" and reusing stock master cylinder
Thanks for any help in advance, pictures are in order. As always, any encouragement/justified criticism/comments are always appreciated.
1987 325e coupe - Auto to Manual conversion
1991 525i M50NV with 405 DME - harness modded by MrEricT
1992 Getrag 250 5-speed transmission with matching manual driveshaft
M20 single mass flywheel and starter
E36 mount arms with E28 535i green mounts and 2x 320i trans mounts
E36 M42 radiator with internal expansion tank
New waterpump, t-stat, belts, gaskets, etc.
OBD2 manifolds with OBD1 downpipes
Relocating factory booster 1/2"-3/4" and reusing stock master cylinder
Thanks for any help in advance, pictures are in order. As always, any encouragement/justified criticism/comments are always appreciated.