Announcement

Collapse
No announcement yet.

Wire Identification

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Wire Identification

    I have no clue what these wires go to. The plug was cut off when I got the harness. I think it might go to the transmission since it was from an auto car. Any help identifying what these two wires go to would be greatly appreciated.



    One is brown (figure it is a ground) while the other is white/blue.
    My 2.9L Build!

    Originally posted by Ernest Hemingway
    There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.

    #2
    Where is it on the harness. Is it on the long end like it would go to the tranny or closer to the top. May be reverse Not sure. Someone will chime in
    NASA
    BMWCCA member
    PCA member 25yrs




    1991 318IS slick top
    1997 M3 sedan
    2001 325CI DD

    “whoever turns the wheel the least, wins"

    Comment


      #3
      It's in the same bundle of wires that go up under the intake manifold. I'm pretty sure it goes back under the car just like the O2 sensor because the O2 sensor wire is also cut.
      My 2.9L Build!

      Originally posted by Ernest Hemingway
      There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.

      Comment


        #4
        You need to post a better/bigger pic to see were it's coming from the harness.

        Comment


          #5
          Originally posted by PiercedE30 View Post
          I have no clue what these wires go to. The plug was cut off when I got the harness. I think it might go to the transmission since it was from an auto car. Any help identifying what these two wires go to would be greatly appreciated.



          One is brown (figure it is a ground) while the other is white/blue.
          In my notes, I have this as oil level sender wire that goes to the sender at the bottom of the oil pan on an E34.


          m

          Comment


            #6
            Originally posted by 7pilot View Post
            In my notes, I have this as oil level sender wire that goes to the sender at the bottom of the oil pan on an E34.


            m
            Oil Level sender should have 3 wires coming off it, i think the other color is blue/yellow if i remember correct.

            If you have everything already connected, determine by process of elimination.
            If you don't have everything connected already, find out what each connector is on the harness.

            Should have:

            Engine Coolant Temp
            Coolant Gauge
            Crank position Sensor
            Cam position Sensor
            Intake Control Valve
            Intake Air Temp
            Throttle Position Sensor
            O2 Sensor

            MAF Plug
            Emissions Purge Valve

            --
            There could be more, i'm going by my NV harness...feel free to add r3vers
            Last edited by herlsy; 08-23-2010, 07:11 AM.

            Comment


              #7
              ^^^ You're correct I 2xchecked.

              m

              Comment

              Working...
              X