M50 crank case ventilation question

[Chrisv006]

Part number 1.

4 goes into the intake boot and 5 gets vacuum right?

[samiam3356]

Where is this vale on the crank case?

:) valve

[dave.a.cote]

Where is this vale on the crank case?

[samiam3356]

Easy for you with a m50, a little harder when your onverting an x52 to OBD1. Either way just put the valve in and run a vacuum line to the connector under the manifold for the ICV and run a line from the valve on the crank case to the intake boot.

[Chrisv006]

How did you all handle it? Just use a stock setup or is there another solution?

Anyone just put a little filtered vent in the connection?