WON'T START!? 91 e30 M3 S52 Swap

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Lakis
    replied
    Originally posted by DREWHALL
    Is it a 413 DME? Could still be EWS. Sounds like it with described conditions.
    Ok- so if it is EWS what are the fixes? Don't say new ecu please...

    Leave a comment:


  • Lakis
    replied
    Originally posted by gobuffs
    If it ran with one chip and not the other, the chip is either wrong or installed backwards.
    We've made sure the notch was the same both times.

    Leave a comment:


  • Lakis
    replied
    ERROR CODE: " ECU BATTERY VOLTAGE LOW "

    I have a MAROON LABEL 0261 200 413

    HELP

    Leave a comment:


  • gobuffs
    replied
    If it ran with one chip and not the other, the chip is either wrong or installed backwards.

    Leave a comment:


  • Lakis
    replied
    Originally posted by STAGGERED M3
    When you first started it. Did it stay on?
    When I started it, yes it ran. But like I said now it won't start. If its an EWS issue; what does that mean?

    Leave a comment:


  • DREWHALL
    replied
    Is it a 413 DME? Could still be EWS. Sounds like it with described conditions.

    Leave a comment:


  • Lakis
    replied
    Originally posted by samiam3356
    Red label 413? There are others that have a red label.

    Who did the wiring or did you buy an adapter?
    Sorry- I bought a used obd1 harness and I am using a TREEHOUSE adapter.

    Leave a comment:


  • STAGGERED M3
    replied
    When you first started it. Did it stay on?

    Leave a comment:


  • samiam3356
    replied
    Red label 413? There are others that have a red label.

    Who did the wiring or did you buy an adapter?

    Leave a comment:


  • Lakis
    replied
    It is the Red label non EWS. 21.5 injector. and throttle body is 3 " to 3.5".

    thanks for responding

    Leave a comment:


  • Bennetts22@aol.com
    replied
    what dme are you running? sounds like a ews problem

    Leave a comment:


  • Lakis
    started a topic WON'T START!? 91 e30 M3 S52 Swap

    WON'T START!? 91 e30 M3 S52 Swap

    UGH:

    99 S52 Running OBD1 (91 E30 m3 chassis)

    The car did start and now only turns but won't start.

    Here is what we've tried:

    DME ECU with and without TMS chip on board. It started without the TMS chip.
    All Grounds checked.
    Scanner shows all sensors are operating; the cranshaft pos. sensor is working.
    We are NOT getting Spark or Injection Pulse.
    Getting fuel and there is (5 gallons in the tank).

    When I did get it started I didn't have the MAF hooked up; I don't know if that affects anything.

    help brainstorming?? Please.
Working...