New TRM December Special: $40 off any NA chip!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • matt
    No R3VLimiter
    • Oct 2003
    • 3731

    #31
    We really appreciate all the orders.

    We will be running this special through 1/1/11 so if you guys want to blow some X-mas money on a tune you can still get the good price. :D

    Thanks!

    Comment

    • mr2peak
      R3VLimited
      • Aug 2008
      • 2388

      #32
      Any dyno's before and after on the same car?
      Drive it hard. Maintain it well.


      Convertible Technical & Discussion
      A Topless Memorandum

      Comment

      • matt
        No R3VLimiter
        • Oct 2003
        • 3731

        #33
        Sorry... had all the dynos on an old jump drive.

        We don't really "before and after" test our stuff against stock chips because 99% of the time we are tuning a car with a 3.5" MAF and 21.5lb or 24lb injectors, so it will barely run at all on a stock chip. When we go to the dyno, it's to custom tune a specific car and not to test our chips.

        That will change when we get our own dyno shortly. :)

        M52 with S52 cams:


        Stockish S52:


        S52 with Schricks:

        Comment

        • Schwarz325
          E30 Addict
          • Aug 2009
          • 487

          #34
          Wow that M52 is impressive!! was it obd1? screw tan s52 go m52 and cams, obd1 and bolt ons ..dayum

          Impressive work fellas, i know where my car is getting tuned when i'm ready :D

          Comment

          • matt
            No R3VLimiter
            • Oct 2003
            • 3731

            #35
            Well, that's a stockish M52 with S52 cams, but we built that motor so it was very fresh and perfectly assembled. I wouldn't generally expect to make that much with a junkyard motor with cams slapped in.

            As always, your mileage may vary. ;)

            Comment

            • matt
              No R3VLimiter
              • Oct 2003
              • 3731

              #36
              This is the last week for this offer. Thanks for all the orders so far.

              Comment

              • matt
                No R3VLimiter
                • Oct 2003
                • 3731

                #37
                Thanks again guys. Today and tomorrow are the last days for this deal.

                Comment

                Working...