wiring harness for m52

[matt]

They are almost the same. Get whichever ones you can find cheapest in the best condition.

[crazyman]

They are almost the same. Get whichever ones you can find cheapest in the best condition.

Sweet, ok I do that that then. The only other question I have is, the manual for the says not to resurface the head cus of clearance issues with the valves. Is it really that big of an issue? I would only do it enough to clean up the mating surface with the head gasket.

[matt]

Why are you taking the head off at all?

But yes, if it's off, have it surfaced.

[crazyman]

The guy that let me have the said it had a blown head gasket, and he started to tear it apart, but couldn't figure how to take off the vanos. All it looked like to me was that the head managed to work loose a little bit. I was just wanting to make sure about getting it resurfaced was ok, cus the book says no. Thanks again for the info.
Chris