Hello wise r3vers, my swap is now running(with exhaust!) and I've noticed a few things.
The speedometer works, but bounces around a bit.
The tach works, but shows my idle as about 1500rpm, which isn't right, it sounds like its idling correctly (7-800). When it revs it doesn't bounce around and will rev right up to 6500-7000 and beyond- which scared me since it only happened once (no rev limiter where it should have been and i backed off) and I FREAKED out. LOL
Also my temp gauge isn't working, I was going to chalk that up to the fact that I don't have the correct sensor in there yet...
Does this sound like the SI Board battery issue?
Car is a 91 318i with obd1 m52b28 with an adapter harness I made myself (everything else works great - even have functioning abs). All the sensors on the engine are new. the engine wiring harness is from a 95 325is auto with a 413 dme.
Thanks in advance.
The speedometer works, but bounces around a bit.
The tach works, but shows my idle as about 1500rpm, which isn't right, it sounds like its idling correctly (7-800). When it revs it doesn't bounce around and will rev right up to 6500-7000 and beyond- which scared me since it only happened once (no rev limiter where it should have been and i backed off) and I FREAKED out. LOL
Also my temp gauge isn't working, I was going to chalk that up to the fact that I don't have the correct sensor in there yet...
Does this sound like the SI Board battery issue?
Car is a 91 318i with obd1 m52b28 with an adapter harness I made myself (everything else works great - even have functioning abs). All the sensors on the engine are new. the engine wiring harness is from a 95 325is auto with a 413 dme.
Thanks in advance.
Comment