S50 Swap List; missing anything???

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Overlord475
    Mod Crazy
    • Dec 2010
    • 799
    #1

    S50 Swap List; missing anything???

    S50US 3.0L M3 Engine w/ 70k miles (overhauled)
    - New main and rod bearings
    - All new timing components
    - Rebuilt Cylinder head
    - Rebuilt Vanos Unit
    - New Belts, Tensioner
    - Spark Plugs, coil pack connectors, and coil packs
    - New gaskets and seals
    - New Water Pump, Thermostat, Metal Water Neck
    - All New Sensors (E30 Gauge temp, E36 FI temp, O2 sensor)

    - Euro Oil Filter Housing with Oil Cooler (AN-8 Lines and Oil Cooler)
    - New Air Flow Meter
    - E34 oil pump, pan and dip stick
    - Custom E30 S50 Wiring Harness
    - 413 Red Label ECU
    - 16" Cooling fan
    - JVT Stainless Steel Headers
    - E36 Throttle Cable
    - IE Offset Engine Mounts
    - Coolant Hoses
    - Light weight single mass Flywheel, with new clutch kit


    Things I I still need:
    - Brake Booster
    - Exhaust from headers back
    - Aluminium Radiator

    Am I missing anything?

    Thanks guys!
    Last edited by Overlord475; 01-30-2011, 12:56 AM.


    --->>>1988 SETA 2.7i Build Thread (Turbo Prep)<<<---
    Tags: None
    • Lof8
      R3VLimited
      • Oct 2006
      • 2827
      #2
      What transmission?
      S50'd

      Originally posted by TDE30
      What is this faggy shit I have happened upon?
      Originally posted by slammin.e28
      I can always live in a M3. Can't M3 a house.

        Comment

        • Overlord475
          Mod Crazy
          • Dec 2010
          • 799
          #3
          Originally posted by Lof8
          What transmission?
          Using a Getrag 260. So going to fab a trans mount and bend my shifter arm 15degs left.

          Thought I saw someone here on r3v selling the mounts pre-fabled for $100??


          --->>>1988 SETA 2.7i Build Thread (Turbo Prep)<<<---

            Comment

            • BustaRhymes325i
              Gaping Anus OG
              • Aug 2009
              • 243
              #4
              Make sure you have correct knock sensors, crank and cam position sensors. Mine had the wrong connectors.

                Comment

                • Overlord475
                  Mod Crazy
                  • Dec 2010
                  • 799
                  #5
                  Originally posted by BustaRhymes325i
                  Make sure you have correct knock sensors, crank and cam position sensors. Mine had the wrong connectors.
                  Will do,

                  Though I am buying the engine already rebuilt and wired up for the E30 swap from Metrix Motorsports. So they should have it all right.

                  Random question...

                  Does cruise control and the in dash MPG gauge still work after this swap??


                  --->>>1988 SETA 2.7i Build Thread (Turbo Prep)<<<---

                    Comment

                    • e30shmobberr
                      E30 Mastermind
                      • Mar 2010
                      • 1934
                      #6
                      Originally posted by Overlord475
                      - E32 oil pump, pan and dip stick
                      e34 btw. and dont forget the gaskets for all of this.

                      Patrick - IG:niicknac
                      RIP 1987 BMW 325is - S50'd ZF 6-speed, flared, bagged

                        Comment

                        • Overlord475
                          Mod Crazy
                          • Dec 2010
                          • 799
                          #7
                          Originally posted by e30shmobberr
                          e34 btw. and dont forget the gaskets for all of this.
                          Sorry, typo... Edit fixed

                          Engine is already put together... Gaskets and all.


                          --->>>1988 SETA 2.7i Build Thread (Turbo Prep)<<<---

                            Comment

                            • JJe30
                              R3VLimited
                              • May 2006
                              • 2044
                              #8
                              Easy mod you can do is light weight pulleys while the motor is out of car.
                              sigpic

                                Comment

                                • StereoInstaller1
                                  GAS
                                  • Jul 2004
                                  • 22679
                                  #9
                                  2 cases of beer

                                  Closing SOON!
                                  "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

                                  Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

                                  Thanks for 10 years of fun!

                                    Comment

                                    • ck_taft325is
                                      R3V OG
                                      • Sep 2007
                                      • 6880
                                      #10
                                      Originally posted by StereoInstaller1
                                      2 cases of beer

                                      4 cases. 4...
                                      Need a part? PM me.

                                      Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                                        Comment

                                        • Overlord475
                                          Mod Crazy
                                          • Dec 2010
                                          • 799
                                          #11
                                          Beer check, lol


                                          --->>>1988 SETA 2.7i Build Thread (Turbo Prep)<<<---

                                            Comment

                                            Previous template Next
                                            Working...