I got the engine to fire up but I'm not getting any readout from the tach....and the whole dash for that matter...seeing as I only ran it for about 20 seconds. Any suggestions?
Announcement
Collapse
No announcement yet.
Tach not working?
Collapse
X
-
If nothing on the dash works- I say tripple check your wiring harness. If you messed with your fuel pump, make sure you remembered to attach the fuel level sender(s).
-Addis
Doing something M50 related? -> http://www.addissimo.com
On Myspace? ->http://groups.myspace.com/r3vlimited
BF2142 SN = BillyGoose
-
Ok heres the update:
The fuel gauge goes right up to where my gas level is when I turn the key to the run position so the dash seems to be working alrite. Here are some pics of some wires around my ECU under the passenger dash.
These 3 wires came off of a plug that came from somewhere towards the drivers side...I'm assuming to the dash:
And this is a black and white wire coming off of the ecu harness, that someone attached a long blue wire to the end of it.
And this is some other random thing that is just hanging out.
Comment
Comment