I have an S50 OBD1 swap in my E30 that has a weird issue I can't figure out.
If I go WOT, it will pull fine, then bog down under load for a few seconds when I back off and try to cruise. I can rev it with the clutch in, and it will rev fine, but as soon as I put load on it, it bogs during that 20 or so second time frame. After that it drives fine as long as I don't go WOT.
Today, I hit a larger bump and it did the same thing. Bogged, then after a while ran normal.
I am thinking maybe the MAF is being sensitive, but other than that I am at a total loss.
Idea's?
If I go WOT, it will pull fine, then bog down under load for a few seconds when I back off and try to cruise. I can rev it with the clutch in, and it will rev fine, but as soon as I put load on it, it bogs during that 20 or so second time frame. After that it drives fine as long as I don't go WOT.
Today, I hit a larger bump and it did the same thing. Bogged, then after a while ran normal.
I am thinking maybe the MAF is being sensitive, but other than that I am at a total loss.
Idea's?
Comment