S50 electric fan bimmer world kit??

[CincinnatiKid]

Anybody used the e36 bimmerworld fan conversion kit?

http://store.bimmerworld.com/bimmerworld-e36-3-series-electric-fan-conversion-kit-p1450.aspx

I'm just curious if there's even room for it, or if I should buy a pusher fan and install in front of the radiator then remove the clutch fan on the motor??

[JRKOUPE]

Anybody used the e36 bimmerworld fan conversion kit?

http://store.bimmerworld.com/bimmerworld-e36-3-series-electric-fan-conversion-kit-p1450.aspx

I'm just curious if there's even room for it, or if I should buy a pusher fan and install in front of the radiator then remove the clutch fan on the motor??

w/ my s50, i thought clearances weretootight for a puller set up.

i run a pusher....no clutch fan.......no worries.

[e30s50dan]

^^^^ diddo !

[Chrisv006]

^^ Double ditto.

[Nick325is]

I've been running a Spal pusher for two years without a fan clutch. No issues at all with cooling.

[e30rapidic]

are you guys running AC?

[Nick325is]

Negative on AC. I pulled all of it out to make way for the pusher fan.

[e30shmobberr]

Negative on AC. I pulled all of it out to make way for the pusher fan.

where did you get your fan, what are the specs?

[Chrisv006]

No AC. I have a 16" advance auto fan ($35 with coupons! google for them...) I think its near 1700 cfm - Low temp thermostat/80c fan switch - mitchmimimimoo radiator (never can spell it).

No problems.