Alright, how do you know if you have s52 cams or not? Sounds like a stupid question, but my boss pointed out something to me. How do you know that someone is not screwing you? The casting numbers are all the same between S52 and M52. Has anyone actually mic'd S52 and M52 cams? From what I have found, they are almost exactly identical. They have different lift and such, but I don't know how much lift I am looking for. Anyone know? or have any mic'd numbers? Thanks
-
I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_Twin -
Valve lift on the S5x cams is 10.2 intake, ~9.7 exhaust. Since IIRC the rocker ratio of a hydraulic lifter motor is 1:1 you should have thereabouts 10mm difference between the diameter of the base circle and the peak of the lobe if it's an S52 cam. M52 cams are 9mm lift.paint sucks -
So the cams are not in the car right now.I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_TwinComment
-
Comment
-
-
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno ThreadComment
Comment