Announcement

Collapse
No announcement yet.

Please Help, IX Booster and Master Cyl. No ABS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Please Help, IX Booster and Master Cyl. No ABS

    I have been reading around and have not found anything yet.

    I have a non-abs 85 325e and an ix booster and master cylinder for ABS. The non-abs system has three lines to the master cylinder. My non-abs master cylinder that was in the car cannot bolt up to the IX diaphram, because the studs are in the wrong spot. Secondly the lines are too short.

    I assume I can modify the lines, but is there a non-abs master cylinder for the ix diaphram?

    Any other suggestions are welcome. Thank you!

    Alex

    #2
    i used the e32 MC and had to make some custom lines



    been Daily driving the car for over a year now, works perfectly
    Last edited by MattM; 04-03-2011, 08:37 PM.


    Full Build Thread Here

    Comment

    Working...
    X