M/S 5x Turbo Tuning packages NOW SHIPPING!

[brody]

Hey guys,

I know there is a small little FI section here but this is more aimed to this particular crowd.

We are proud to finally offer one of the best options for tuning your M50, S50 or OBDI converted M52 and S52 turbo project! Unlike other tuning packages, our system is designed to give YOU the control you desire over our engine and its tune. The W.A.R. Chip allows you to have the final say in your tune and allows you to modify your tune as your car and power evolves!

Retaining the stock ECU offers so many advantages! Some of these advantages include retention of the stock diagnostic system, stock like driveability, stock like reliability and reduced stress and installation time.


P
Key Features:

• 650+ HP capable MAF
• 100% plug and play design
• Blow Through configuration
• Stock ECU Retention
• Flawless stock like driveability
• End user adjustability
• Multiple tunes on one device

Package Includes:

• Miller 100% Plug and Play Blo-Thru MAF
• Weld on aluminum MAF bung
• 6 x 60 Lb/Hr High flow fuel injectors
• Miller W.A.R. Chip
• Miller WAR Chip editing suite
• Blo-Thru base tune
• Remote tuning support

Read more here

We will have N/A Tuning packages coming soon too!!!

[mohamadr89]

how much hp\ torque do u gain from this package when adding it to a e30 s50b30us swap?

[Blackangusinc]

how much hp\ torque do u gain from this package when adding it to a e30 s50b30us swap?

It all comes down to the tune.

[brody]

It all comes down to the tune.

It comes down to the tune and the hardware...

This package will allow you to make the most out of your given set up. You don't need to be strapped to a generic base tune.

If your set up can potentially make 500 HP then this will allow you/us to tune your car and make that potential 500 HP.

Our N/A Packages will be the same. If your N/A set up is capable of making 300 HP, you will need a tune to get you there most likely. A tuning package would let you get there.

[mattdk318i]

Just got my tracking number. Brody is the man. Nothing but the best to say about his customer service and punctuality at answering any of my questions.

Ill post pics and progree as soon as i get these beauties

[samiam3356]

What will N/A packages run roughly?

[mohamadr89]

This all sounds great, I'll be picking one up after I do the swap and throw a few mods on there.

[brody]

What will N/A packages run roughly?

It depends if we make our N/A MAF housing out of billet or plastic and also if we include injectors or not.

Probably around the 600 - 750 mark depending on what we decide on including.

This all sounds great, I'll be picking one up after I do the swap and throw a few mods on there.

Call us anytime if you have questions about our stuff!

[mattdk318i]

Just got mine in!! I am missing a cable but was sent a note letting me know that it will be on the way shortly.

More info to come!!

[StereoInstaller1]

Brody, is there any chance of electronic boost control being controlled by the WARchip?

[mattdk318i]

http://www.millerperformancecars.com/files/WAR%20Chip%20Turbo%20Manual.pdf

Sure does luke.