E34 engine mounts..who's using em?

[lolcantturn]

Just wondering. Not too much info on them

[Jand3rson]

Any reason why you're wanting to use them? I'm using E28 535i engine mounts like many others, they seem to be the best bet.

[DTM190]

Whats the height on the E28 535i mounts? Does any one know?

The ones I have in my white car are around 60mm and engine sits that low I dont know that even a ejknight skid would clear it

[lolcantturn]

Any reason why you're wanting to use them? I'm using E28 535i engine mounts like many others, they seem to be the best bet.

A fellow enthusiast around here is giving me some NIB for free

[giantkeeper]

I'm using E28 535i engine mounts like many others, they seem to be the best bet.

this

[m_dudey]

I'm using the e34 engine mounts. I swapped from the e28 green mounts cuz the e34 mounts are a little bit softer and helps minimize NVH. they seem to work just fine.

[nrubenstein]

For street driving, the E34 mounts seem to be ok. I've heard reports that they fall apart almost instantly when abused hard, though.

You can certainly use them for the moment.

[Jand3rson]

I would still go with the E38 535i green mounts, general consensus is they are stronger and hold up better.

[lolcantturn]

For street driving, the E34 mounts seem to be ok. I've heard reports that they fall apart almost instantly when abused hard, though.

You can certainly use them for the moment.

I would still go with the E38 535i green mounts, general consensus is they are stronger and hold up better.

Thanks guys. I'm currently going for a "good comfortable" DD right now, but with the amount of short spirited driving I do, they'll probably fall apart a bit too quick. I'll use them for now.