iX booster questions

[etxxz]

btw...I used an IX booster(NO SPACER),E34 MC AND E34 reservoir...and it clears fine..I slotted the bottom firewall hole a little so the whole thing sits down a touch

IX MC and resevoir also work here. They are the same, or nearly identical.

The e34 booster can also be used with spacer, or preferably without spacer, but needs the same rod modification (shortened in a sense)

[bmw2002tiiagave]

thanks guys. gonna try that elbow part#

[e30s50dan]

btw...I used an IX booster(NO SPACER),E34 MC AND E34 reservoir...and it clears fine..I slotted the bottom firewall hole a little so the whole thing sits down a touch

[herlsy]

Also an option is the e32 740i or e34 540i elbows. It doesn't look like they are available as an individual part so usually just a junkyard part i guess. I used them on my setup and they worked great.

[Gooch]

Master cylinder elbow - 34321102282 x2

[bmw2002tiiagave]

I know many have asked about the iX booster stuff, but I did a lot of searching and still haven't found a solid answer to the remote reservoir problem.

I know all the parts necessary. 1) 2002 reservoir 2) rubber / cloth braided lines 3) grommets for the M/C

The question is, what elbows or L shaped fittings do I use? I'm referring to the fitting that connects the M/C to the reservoir lines. I've seen many iX / 735 remote booster setups but most of them don't say what L shaped fittings they used.

Thanks!