Anyone using the aux fan? How'd you mount it?

[lolcantturn]

Anyone here using the OEM aux fan for cooling? How'd you Guys mount it?
Should I make up mounts and mount it as close as possible in front of my radiator? Thanks guys

[Sagaris]

I heard that you need to use the M3 mounting brackets

[Chris916]

simply cut it off the condensor and made one bracket for extra strength and mounted it on just like stock:

[lolcantturn]

simply cut it off the condensor and made one bracket for extra strength and mounted it on just like stock:

Genious! That's what im going to do.

[Holland]

Replaced with 14'' Spal...

[highoutput]

Replaced with 14'' Spal...

^ I was waiting for that...

[zxert]

Dumb question. How do you activate the condenser fan?

[lolcantturn]

From my knowledge there's only three connectors so just mix and match the ones that will make the fan always turn on when the car's on haha.

[e30pq]

I used a SPAL and used their mounting system.

The best way to explain it is that the mounts look like nails they go thru the radiator holes into a flat washer like piece that grabs the nail similar to a zip tie.

Wow that was hard to explain.

[Beej '86 325es]

You can get european aux fan mounts for cars without A/C. That's what I used to run before my engine swap.