New Idea!

[EtaSport]

All right, I will make a few of them.

For my s50, I used green e28 M5 motor mounts on both sides of the engine and green e21 transmission mounts.

Not only did I raise the height of the drivers side of the tranny support, I cut the passenger side to give me the needed angle.

If someone wants me to make a support for them, I think I will need to know what engine mounts you are using and what transmission mounts you want to use.

I am planning a step by step write-up on how I fabricated the transmission mount. I have the pictures but little time lately to put it all together.

Let me know.

Doug

more swapped maryland guys coming out of the woodwork.

[dougsic]

well i would love a write up it would make my swap alot easier. i have a extra bracket i can use so i would have not real down time. quick question did you use the e21 tranny mounts with the metal cup like from akg?

Well, I used the e21 mounts but didn't put them in metal cups. I thought about it and could, but in my case my car is a convertible and since it's my street car, it won't see any track time.

I'll try to get the write-up done this weekend.