If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
For my s50, I used green e28 M5 motor mounts on both sides of the engine and green e21 transmission mounts.
Not only did I raise the height of the drivers side of the tranny support, I cut the passenger side to give me the needed angle.
If someone wants me to make a support for them, I think I will need to know what engine mounts you are using and what transmission mounts you want to use.
I am planning a step by step write-up on how I fabricated the transmission mount. I have the pictures but little time lately to put it all together.
Let me know.
Doug
more swapped maryland guys coming out of the woodwork.
well i would love a write up it would make my swap alot easier. i have a extra bracket i can use so i would have not real down time. quick question did you use the e21 tranny mounts with the metal cup like from akg?
Well, I used the e21 mounts but didn't put them in metal cups. I thought about it and could, but in my case my car is a convertible and since it's my street car, it won't see any track time.
Comment