Quick fan wiring and mounting question

[trackjunkie21]

You can get a temp switch for around $10. Shop around, it's very simple, I did it in a matter of 1 hour, the longest part was testing which wire is constant 12v, switched and then finding a place to fit the relay. oh and remember if using a 5 prong relay, run both 87a and 87 to the fan switch (IIRC) a 5 prong needs a ground to activate.

[giantkeeper]

And also don't you have yours wired to ignition switch too?:/

No, mine is set up through the stock wiring

[lolcantturn]

I'm going to get a temp switch from Guten today or tomorrow and install it on my rad and follow "The official fan wiring" thread and hopefully it all goes well. Thanks fellows